Influence the size and quality of chips in the pulping
Nenhuma Miniatura disponível
Data
2015-09-01
Autores
Carvalho Araujo Camargo, Samique Kyene de [UNESP]
Silva, Tiago Jose da [UNESP]
Costa, Daiane de Moura [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Univ Federal Santa Maria
Resumo
The quality of the chips used in pulp production is considered an important factor for the industry operability and quality of the pulp. Desirable chips are those that have little variations in physical and chemical characteristics, free of contaminants, high bulk density, homogeneous impregnation, polysaccharides low degradation and high performance in the processing of pulp. In manufacturing the chip size classification has been adopted after studies showed that the chip very large and / or too small could interfere in the delignification process and the quality of pulp. The objective of this paper is to present the dimensions and quality of chips for pulping.
Descrição
Palavras-chave
Cellulose, Density, Delignification, Pulp
Como citar
Revista Eletronica Em Gestao Educacao E Tecnologia Ambiental. Santa Maria: Univ Federal Santa Maria, v. 19, n. 3, p. 813-820, 2015.