Efeito dos parâmetros de retificação no acabamento superficial de cerâmicas avançadas
Alternative title
Effect of grinding parameters on surface finishing of advanced ceramicsAuthor
Date
2016-10-01Type
View/ Open
Access rights

Metadata
Show full item recordAbstract
The advanced ceramics shows a wide application, from components for the electronic industry to implants and prostheses. In the last decades the bioceramic has been drawing attention in applications such as bone prostheses and dental implants because it presents bioinert and bioactive material characteristics, with good biocompatibility, and high compressive strength. We studied the effect of grinding parameters for ceramics with high alumina, prepared with three different particle sizes by examining the surface finish of these ce-ramics. During the grinding process, the parameters were: table speed (55 mm / s 250 mm / s) and the depth of cut (5 μm and 60 μm). Apart from these parameters, two cooling types were used: conventional cooling and MQL (Minimum Quantity Lubricant). The results obtained through the roughness of the grinded surface and statistical analyzes showed a reduction in the roughness of the parts with small and medium grain size when using MQL cooling. The ceramics with small grain size grinded with a table speed of 55 mm/s and depth of cut of 60 μm showed roughness of less than 0.28 μm using the MQL cooling system. However, when grinded at higher speeds using MQL the ceramics with smaller grain size showed an increase in surface roughness values.
How to cite this document
Language
Collections

Related items
Showing items related by title, author, creator and subject.
-
Núcleos de Ensino da Unesp: artigos 2009
Pinho, Sheila Zambello de; Oliveira, José Brás Barreto de
; Gazola, Rodrigo José Cristiano
; Mazotti, Adriano César
; Molero, Camila Schimite
; Mendes, Carolina Borghi
; Mello, Denise Fernandes de
; Marques, Emilia de Mendonça Rosa
; Talamoni, Jandira Liria Biscalquini
; Silva, José Humberto Dias da
et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
-
Núcleos de Ensino da Unesp: artigos 2008
Pinho, Sheila Zambello de; Oliveira, José Brás Barreto de
; Pontes, Sueli Rodrigues
; Almeida, Djanira Soares de Oliveira e
; Godoy, Kathya Maria Ayres de
; Rosa, Claudia de Souza
; Nunes, Julianus Araújo
; Salvador, Sérgio Azevedo
; David, Célia Maria
; Vilche Peña, Angel Fidel
et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
-
Ser e tornar-se professor: práticas educativas no contexto escolar
Pinho, Sheila Zambello de; Spazziani, Maria de Lourdes
; Mendonça, Sueli Guadelupe de Lima
; Rubo, Elisabete Aparecida Andrello
; Villarreal, Dalva Maria de Oliveira
; Duarte, Camila
; Okamoto, Mary Yoko
; Souza, Thais R.
; Garms, Gilza Maria Zauhy
; Marin, Fátima Aparecida Dias Gomes
et al. (Coleção PROGRAD (UNESP), 2012) [Livro]