Publicação: An ultrasensitive human cardiac troponin T graphene screen-printed electrode based on electropolymerized-molecularly imprinted conducting polymer
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
A nano-molecularly imprinted polymer (N-MIP) assembled on a screen-printed electrode for the cardiac troponin T (cTnT) was developed. The biomimetic surface was obtained by a co-polymer matrix assembled on the reduced graphene oxide (RGO) electrode surface. The cTnT active sites were engineered using pyrrole and carboxylated pyrrole that was one-step electropolymerized jointly with cTnT by cyclic voltammetry. The stepwise preparation of the biomimetic surface was characterized by cyclic and differential pulse voltammetries using the ferrocyanide/ferricyanide as redox probe. Structural and morphological characterization was also performed. The optimal relation of pyrrole and pyrrole-3-acid carboxylic to perform the cTnT biomimetic nanosurface was obtained at 1:5 ratio. The analytical performance of cTnT N-MIP performed by differential pulse voltammetry showed a linear range from 0.01 to 0.1ngmL-1 (r=0.995, p«0.01), with a very low limit of detection (0.006ngmL-1). The synergic effect of conductive polymer and graphene forming 3D structures of reactive sites resulted in a N-MIP with excellent affinity to cTnT binding (KD=7.3 10-13molL-1). The N-MIP proposed is based on a simple method of antibody obtaining with a large potential for point-of-care testing applications.
Descrição
Palavras-chave
Acid carboxylic-3-pyrrole, Cardiac troponin T, Graphene, Molecularly imprinted polymer, Point-of-care testing, Pyrrole
Idioma
Inglês
Como citar
Biosensors and Bioelectronics, v. 77, p. 978-985.
