Publicação: Dielectric characterization of microwave sintered lead zirconate titanate ceramics
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
Highly reactive lead zirconate titanate powders (PZT) with different compositions were successfully synthesized by the oxidant-peroxo method (OPM) and used to prepare dense ceramic samples with composition near to the morphotropic phase boundary (MPB) sintered at 1000 °C for 2 h using a tubular conventional oven and a commercial microwave system. Crystalline phases were identified in the powder and ceramic samples by X-ray powder diffraction and FT-Raman spectroscopy at room temperature. The fractured surface of the ceramic sample showed a high degree of densification with fairly uniform grain sizes. Dielectric constants measured in the range from 30 to 500 °C at different frequencies (1, 10 and 100 kHz) indicated a normal ferroelectric behavior regardless of the sintering method. Samples sintered by a microwave radiation (MW) method and composition near to the MPB region showed a maximum dielectric constant of 17.911 and an anomalous high Curie temperature of 465 °C.
Descrição
Palavras-chave
Ceramics, Chemical synthesis, Dielectric response, PZT, Sintering
Idioma
Inglês
Como citar
Ceramics International, v. 42, n. 13, p. 14423-14430, 2016.
