A 2D BEM formulation considering dissipative phenomena and a full coupled multiscale modelling
Nenhuma Miniatura disponível
Data
2020-10-01
Autores
Fernandes, G. R.
Pontes, G. B.S. [UNESP]
Oliveira, V. N.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
A full coupled multi-scale modelling using the Boundary Element Method for analysing the 2D problem of stretched plates composed of heterogeneous materials, where dissipative phenomena can be considered, is presented. Both the macro-scale and the micro-scale are modelled by BEM formulations where the consistent tangent operator (CTO) is used to achieve the equilibrium of the iterative procedures. The equilibrium equation of the plate (macro-continuum) is written in terms of in-plane strains while the equilibrium problem of the microstructure, which is defined by the RVE (Representative Volume Element), is solved in terms of displacements fluctuations. In this kind of modelling, the mechanical behaviour of the material is governed by the homogenized response of the RVE, obtained after solving its equilibrium problem. As this kind of modelling is expensive computationally, it is important to investigate other numerical methods to have faster formulations, but which are still accurate. To validate the presented model, the numerical results are compared to the ones where the material microstructure (RVE) is modelled by the FEM.
Descrição
Palavras-chave
2D problem, Boundary elements, Homogenization, Multi-scale modelling, RVE
Como citar
Engineering Analysis with Boundary Elements, v. 119, p. 25-43.