Control and suppression of vortex shedding from a slightly rough circular cylinder by a discrete vortex method
Nenhuma Miniatura disponível
Data
2020-09-01
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
A discrete vortex method is implemented with a hybrid control technique of vortex shedding to solve the problem of the two-dimensional flow past a slightly rough circular cylinder in the vicinity of a moving wall. In the present approach, the passive control technique is inspired on the fundamental principle of surface roughness, promoting modifications on the cylinder geometry to affect the vortex shedding formation. A relative roughness size of ϵ∗/d∗= 0.001 (ϵ∗is the average roughness and d∗is the outer cylinder diameter) is chosen for the test cases. On the other hand, the active control technique uses a wall plane, which runs at the same speed as the free stream velocity to contribute with external energy affecting the fluid flow. The gap-to-diameter varies in the range from h∗/d∗= 0.05 to 0.80 (h∗is the gap between the moving wall and the cylinder bottom). A detailed account of the time history of pressure distributions, simultaneously investigated with the time evolution of forces, Strouhal number behavior, and boundary layer separation are reported at upper-subcritical Reynolds number flows of Re = 1.0 × 105. The saturation state of the numerical simulations is demonstrated through the analysis of the Strouhal number behavior obtained from temporal history of the aerodynamic loads. The present work provides an improvement in the prediction of Strouhal number than other studies no using roughness model. The aerodynamic characteristics of the cylinder, as well as the control of intermittence and complete interruption of von Kármán-type vortex shedding have been better clarified.
Descrição
Palavras-chave
Bluff body, Lagrangian description, Roughness model, Suppression hybrid control, Venturi effect
Como citar
Energies, v. 13, n. 17, 2020.