Recent Submissions

  • Avaliação da percepção dos docentes no desenvolvimento de manequins odontológicos como ferramenta pedagógica

    Lopes, Patrícia Carla Autor UNESP (Universidade Estadual Paulista (Unesp), 2022) [Dissertação de mestrado]
    No ensino da odontologia é de extrema importância a junção do conhecimento teórico ao prático. Para desenvolver as habilidades práticas, os cursos superiores em odontologia realizam um aprimoramento pré-clínico em laboratório, ...
  • Caracterização genotípica de amostras clínicas de Cryptococcus spp. e avaliação do perfil de virulência in vitro e em modelo de Galleria mellonella

    Carmo, Fabíolla Nascimento do (Universidade Estadual Paulista (Unesp), 2021) [Dissertação de mestrado]
    A criptococose é uma infecção oportunista comum em pacientes HIV positivos, mas também pode afetar pacientes com outras comorbidades imunológicas ou imunocompetentes. Neste trabalho, cepas clínicas de Cryptococcus spp. ...
  • Flexural strength of a pressable lithium disilicate ceramic: influence of surface treatments

    Sato, Tabata do Prado Autor UNESP; Cotes, Caroline Autor UNESP; Yamamoto, Lígia Tiaki Autor UNESP; Rossi, Natalia Rivoli Autor UNESP; da Cruz Macedo, Vanessa Autor UNESP; Kimpara, Estevão Tomomitsu Autor UNESP (Applied Adhesion Science, 2013) [Artigo]
    The aim of this paper was to evaluate the influence of different surface treatments on the flexural strength of a pressable lithium disilicate ceramic. Sixteen bars (16x2x4 mm) were made, divided into subgroups (n = 10), ...
  • Jaw osteosarcoma and pregnancy: a rare coexistence

    Santos, Thaís Aguiar Autor UNESP; Américo, Márcia Gimenes; Priante, Antonio Vitor Martins; de Oliveira, Maria Fernanda; Anbinder, Ana Lia Autor UNESP (Autopsy and Case Reports, 2022) [Resenha]
    Osteosarcoma of the jaw represents less than 1% of all head and neck malignancies. This malignancy in pregnant women occurs in one per 1000 deliveries. We report a case of a 29-year-old woman, in the 33rd week of gestation, ...
  • Influence of Different Fibreglass Post Geometries on the Stress Distribution and Pull-Out Bond Strength Before and After Mechanical Cycling

    Del'Gaudio Pignataro, Rossana Reim Autor UNESP; de Paula Samico, Renata Autor UNESP; Campaner, Larissa Mendes Autor UNESP; Bottino, Marco Antonio Autor UNESP; Borges, Alexandre Luiz Souto Autor UNESP; Tribst, João Paulo Mendes Autor UNESP (European Endodontic Journal, 2021) [Artigo]
    Objective: There are no reports in the literature on whether FGP geometry influences the bond strength of the endodontically restored tooth. This study aimed to determine the stress distribution and the pull-out bond ...
  • The authors thank all the authors who responded to their requests and provided useful information that made it possible to complete this systematic review and meta-analysis.

    Lazzari, Thiago Rodrigues Autor UNESP; Jardini, Maria Aparecida Neves Autor UNESP; dos Santos, Nidia Castro; da Silva Neves, Felipe Lucas Autor UNESP; da Silva Lima, Victória Clara Autor UNESP; de Melo Filho, Antonio Braulino Autor UNESP; Santamaria, Mauro Pedrine Autor UNESP (International Journal of Oral Implantology, 2022) [Artigo]
    Purpose: To evaluate the influence of connective tissue graft on the soft tissue thickness and aesthetics around single implants placed in the aesthetic zone of the maxilla. Materials and methods: Forty-two patients with ...
  • Effect of systemic antibiotic and probiotic therapies as adjuvant treatments of subgingival instrumentation for periodontitis: a randomized controlled clinical study

    Ramos, Tatiane Caroline de Souza Autor UNESP; Boas, Mariéllen Longo Vilas Autor UNESP; Nunes, Camilla Magnoni Moretto Autor UNESP; Ferreira, Camila Lopes Autor UNESP; Pannuti, Cláudio Mendes; Santamaria, Mauro Pedrine Autor UNESP; Jardini, Maria Aparecida Neves Autor UNESP (Journal of applied oral science : revista FOB, 2022) [Artigo]
    OBJECTIVE: This study assessed the efficacy of two adjunct therapies (antibiotic and probiotic) for periodontal treatment based on clinical and immunological parameters in patients with Stage II and III Grade B periodontitis. ...
  • Viscosity modulation of resin composites versus hand application on internal adaptation of restorations

    Andrade, Adrielle Caroline Moreira Autor UNESP; Trennepohl, Amanda Acioli Autor UNESP; Moecke, Sabrina Elise Autor UNESP; Borges, Alessandra Bühler Autor UNESP; Torres, Carlos Rocha Gomes Autor UNESP (Clinical Oral Investigations, 2022) [Artigo]
    Objective: To compare the effect of the injection of viscosity modulated resin composites versus hand application without modulation, on the internal adaptation of different material to the gingival wall of class II ...
  • Macronutrient absorption rate of a Runner-type peanut cultivar

    Bertino, Antonio M. P. Autor UNESP; de Faria, Rogerio T. Autor UNESP; Jesus, Eduardo da S. B. Autor UNESP; Alves, Thayane L. Autor UNESP; Cazuza Neto, Ancelmo Autor UNESP; Barbosa, José de A. Autor UNESP (Revista Brasileira de Engenharia Agricola e Ambiental, 2022) [Artigo]
    Peanuts are one of the most produced legumes in the world; however, there is a lack of knowledge on their nutritional needs and the growth phases with greater demands; therefore research is required on the nutrient absorption ...
  • Canine guidance reconstruction with ceramic or composite resin: A 3D finite element analysis and in vitro wear study

    Bueno, Mírian Galvão; Tribst, João Paulo Mendes; Borges, Alexandre Luiz Souto Autor UNESP (Journal of Prosthetic Dentistry, 2022) [Artigo]
    Statement of problem: Wear of the maxillary canine cusps is a common clinical condition which can affect function and esthetics and, in some situations, lead to occlusal pathology. The mechanical behavior of different ...
  • MALDI-TOF mass spectrometry of saliva samples as a prognostic tool for COVID-19

    Lazari, Lucas C.; Zerbinati, Rodrigo M.; Rosa-Fernandes, Livia; Santiago, Veronica Feijoli; Rosa, Klaise F.; Angeli, Claudia B.; Schwab, Gabriela; Palmieri, Michelle; Sarmento, Dmitry J. S.; Marinho, Claudio R. F. et al. (Journal of Oral Microbiology, 2022) [Artigo]
    Background: The SARS-CoV-2 infections are still imposing a great public health challenge despite the recent developments in vaccines and therapy. Searching for diagnostic and prognostic methods that are fast, low-cost and ...
  • Amalgam allergy and Burning Mouth Syndrom: treatment and 25 years recall

    De Paiva Gonçalves, Sérgio Eduardo Autor UNESP; Silva, Regina Célia Santos Pinto Autor UNESP; Gomes, Ana Paula Martins Autor UNESP; Yui, Karen Cristina Kazue Autor UNESP; Barcellos, Daphne Camara; Bresciani, Eduardo Autor UNESP; Özcan, Mutlu (Brazilian Dental Science, 2021) [Artigo]
    Background: Burning mouth syndrome (BMS) is a non-neuropathic chronic orofacial pain condition, characterized by the presence of burning/warm sensation without specific mucosal lesions. Objective: The aim of the present ...
  • Efficacy of S-PRG filler varnishes on enamel caries remineralization

    Moecke, Sabrina Elise Autor UNESP; Silva, Ana Gabriele de Cassia Santos Autor UNESP; Andrade, Adrielle Caroline Moreira Autor UNESP; Borges, Alessandra Bühler Autor UNESP; Torres, Carlos Rocha Gomes Autor UNESP (Journal of Dentistry, 2022) [Artigo]
    Objectives: To evaluate the remineralizing effect of varnishes containing different concentrations of S-PRG filler or sodium fluoride on enamel caries lesions. Methods: Enamel specimens were obtained from bovine incisors, ...
  • Effect of whitening mouthrinses on color change of stained resin composites

    Mailart, Mariane Cintra Autor UNESP; Crastechini, Érica Autor UNESP; de OLIVEIRA, Juliana Boa Sorte Autor UNESP; Torres, Carlos Rocha Gomes Autor UNESP; Caneppele, Taciana Marco Ferraz Autor UNESP; Borges, Alessandra Bühler Autor UNESP (Brazilian Dental Science, 2022) [Artigo]
    Objective: The present study compared the effect of whitening mouthrinses (WM) on the color change of stained resin composites (RC). Material and Methods: Cylindrical specimens (6mm-diameter and 1mm-thickness) were prepared ...
  • Influence of titanium nanotubular surfaces, produced by anodization, on the behavior of osteogenic cells: in vitro evaluation

    de ARAÚJO, Juliani Caroline Ribeiro Autor UNESP; Do Espirito Santo, Lidiane Lopes Autor UNESP; Schneider, Sandra Giacomin; Santana Melo, Gabriela de Fátima Autor UNESP; Chaves, Isabel; Franzini, Denise Richter; Spalding, Marianne Autor UNESP; de VASCONCELLOS, Luana Marotta Reis Autor UNESP (Brazilian Dental Science, 2022) [Artigo]
    Objective: The objective of this study was to evaluate in vitro the influence of the anodized surface of Ti35Nb7Zr alloy on the behavior of osteogenic cells, for future application in biomedical implants. Material and ...
  • Finding the combination of multiple biomarkers to diagnose oral squamous cell carcinoma – A data mining approach

    da Costa, Nattane Luíza; de Sá Alves, Mariana Autor UNESP; de Sá Rodrigues, Nayara Autor UNESP; Bandeira, Celso Muller Autor UNESP; Oliveira Alves, Mônica Ghislaine; Mendes, Maria Anita; Cesar Alves, Levy Anderson; Almeida, Janete Dias Autor UNESP; Barbosa, Rommel (Computers in Biology and Medicine, 2022) [Artigo]
    Data mining has proven to be a reliable method to analyze and discover useful knowledge about various diseases, including cancer research. In particular, data mining and machine learning algorithms to study oral squamous ...
  • Influence of Framework Material and Posterior Implant Angulation in Full-Arch All-on-4 Implant-Supported Prosthesis Stress Concentration

    Tribst, João Paulo Mendes; de Morais, Dayana Campanelli Autor UNESP; de Matos, Jefferson David Melo Autor UNESP; Lopes, Guilherme da Rocha Scalzer Autor UNESP; Dal Piva, Amanda Maria de Oliveira; Borges, Alexandre Luiz Souto Autor UNESP; Bottino, Marco Antonio Autor UNESP; Lanzotti, Antonio; Martorelli, Massimo; Ausiello, Pietro (Dentistry Journal, 2022) [Artigo]
    This study evaluated the influence of distal implants angulation and framework material in the stress concentration of an All-on-4 full-arch prosthesis. A full-arch implant-supported prosthesis 3D model was created with ...
  • Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses

    Arcila, Laura Viviana Calvache Autor UNESP; de Carvalho Ramos, Nathália Autor UNESP; Campos, Tiago Moreira Bastos; Dapieve, Kiara Serafini; Valandro, Luiz Felipe; de Melo, Renata Marques Autor UNESP; Bottino, Marco Antonio Autor UNESP (Journal of Advanced Prosthodontics, 2021) [Artigo]
    PURPOSE. To characterize the microstructure of three yttria partially stabilized zirconia ceramics and to compare their hardness, indentation fracture resistance (IFR), biaxial flexural strength (BFS), and fatigue flexural ...
  • Natural latex serum: characterization and biocompatibility assessment using Galleria mellonella as an alternative in vivo model

    Pegorin Brasil, Giovana Sant’Ana Autor UNESP; de Barros, Patrícia Pimentel Autor UNESP; Miranda, Matheus Carlos Romeiro; de Barros, Natan Roberto; Junqueira, Juliana Campos Autor UNESP; Gomez, Alejandro; Herculano, Rondinelli Donizetti Autor UNESP; de Mendonça, Ricardo José (Journal of Biomaterials Science, Polymer Edition, 2022) [Artigo]
    Natural latex serum (NLS) is one of the natural rubber latex fractions from Hevea brasiliensis tree, which is formed by centrifuged serum and is composed of proteins, acids, nucleotides, salts and carbohydrates. The proteins ...
  • Bonding Performance for Repairs Using Bulk Fill and Conventional Methacrylate Composites

    Benzi, Janaina Galvão; Pucci, César Rogério Autor UNESP; Freitas, Maiara Rodrigues; Suzy Liporoni, Priscila Christiane; Zanatta, Rayssa Ferreira (International Journal of Dentistry, 2021) [Artigo]
    This study compared the bond strength of a composite repair made with a bulk fill composite and a conventional one using different surface treatments. Specimens were prepared as truncated cones (bases: 4 mm × 2 mm, height: ...

View more