Publicação: Monitoramento da qualidade da areia de moldagem em uma fundiçã o de autopeças de ferro fundido
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Trabalho apresentado em evento
Direito de acesso
Resumo
The purpose of this paper is to describe the application of a control chart for means with double sampling to monitor the green sand compactability in a major foundry where iron castings for the automotive segment are produced. Compactability measurements carried out at the end of consecutive sand mixing cycles have indicated that the variable observations fit to an autocorrelated process. To set the control limits of the control chart introduced in this study the serial dependence was taken into account and the chart properties were obtained from closed-form expressions. The control chart design and statistical power allow the quick detection of process disturbances without any extra sampling effort. Due to these features, the green sand compactability can be consistently monitored, preventing the occurrence of defective sand molds and castings. Copyright © (2010) by Associação Brasileira de Metalurgia Materiais e Mineração (ABM).
Descrição
Palavras-chave
Autocorrelation, Control chart, Molding sand, Quality
Idioma
Português
Como citar
65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, v. 3, p. 2255-2265.
