Publicação: Grain size effect on the electrical response of SnO2 thin and thick film gas sensors
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
ABM, ABC, ABPol
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
Porous nano and micro crystalline tin oxide films were deposited by RF Magnetron Sputtering and doctor blade techniques, respectively. Electrical resistance and impedance spectroscopy measurements, as a function of temperature and atmosphere, were performed in order to determine the influence of the microstructure and working conditions over the electrical response of the sensors. The conductivity of all samples increases with the temperature and decreases in oxygen, as expected for an n-type semiconducting material. The impedance plots indicated the existence of two time constants related to the grains and the grain boundaries. The Nyquist diagrams at low frequencies revealed the changes that took place in the grain boundary region, with the contribution of the grains being indicated by the formation of a second semicircle at high frequencies. The better sensing performance of the doctor bladed samples can be explained by their lower initial resistance values, bigger grain sizes and higher porosity.
Descrição
Palavras-chave
semiconductors, impedance spectroscopy, electrical propertie
Idioma
Inglês
Como citar
Materials Research. ABM, ABC, ABPol, v. 12, n. 1, p. 83-87, 2009.
