Thermal degradation of geomembranes after exposure to heat
Nenhuma Miniatura disponível
Data
2006-01-01
Autores
Lodi, P. C.
Bueno, B. S.
Kuwano, J.
Koseki, J.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Millpress Science Publishers
Resumo
HDPE and PVC geomembranes are sensitive to changes in their properties when in contact with high temperatures. The effects of hot temperature on polymeric geomembranes are assessed by the ASTM D794 and ASTM D5721.This paper brings an analysis of degradation of the Poly Vinyl Chloride (PVC) and High Density Poly Ethylene (HDPE) geomembranes when exposed to conventional and air oven after specific periods.. Mechanical and physical properties were evaluated. OIT tests were also performanced to evaluate the level of oxidation degradation occurred on the HDPE geomembranes. Geomembranes of two thicknesses were tested: 1.0, 2.0 nun (PVC) and 0.8, 2.5 mm, (HDPE). The results obtained show, for example, that after the last period of exposure, the PVC geomembranes (1.0, 2.0 mm) were more rigid and stiffer than fresh samples. The HDPE geomembranes, on the other hand, when exposed to heat presented increases in deformation. OIT tests showed efficient to detect some level of degradation on the HDPE geomembranes.
Descrição
Palavras-chave
geomembranes, laboratory tests, thermal degradation, OIT tests
Como citar
Geosynthetics, Vols 1-4. Rotterdam: Millpress Science Publishers, p. 391-394, 2006.