Electrodeposited thin mercury films on Pt-Ir alloy electrodes
Nenhuma Miniatura disponível
Data
1999-07-30
Autores
Fertonani, F. L.
Benedetti, Assis Vicente [UNESP]
Servat, J.
Portillo, J.
Sanz, F.
Título da Revista
ISSN da Revista
Título de Volume
Editor
Elsevier B.V.
Resumo
Mercury thin films prepared by electrochemical deposition on Pt-Ir alloy and after partial removing of mercury at different temperatures were studied by means of an interferometric surface mapping microscope and by X-ray photoelectronic spectroscopy. Mercury film samples having mercury partially removed by anodic stripping at a potential more positive than the corresponding peak in the voltammogram were also studied using the same techniques. For blank samples the surface topographic studies showed well defined grain boundaries. Mercury film samples when heated up to different temperatures showed as material is removed and that the surface roughness decreases as the temperature increases. For samples heated up to 800 degrees C the surface roughness is approximately the same that for the blank. A model for the interphase of volumetric mercury electrodeposited on a Pt-Ir alloy has been proposed using samples both electrochemically and thermally removed of their Hg coatings. The model includes a layered three-region structure, containing at least two Pt-Hg intermetallics: PtHg4 and PtHg2. A substrate modified region, iridium rich, has also been detected. (C) 1999 Elsevier B.V. S.A. All rights reserved.
Descrição
Palavras-chave
mercury, platinum, surface composition
Como citar
Thin Solid Films. Lausanne: Elsevier B.V. Sa, v. 349, n. 1-2, p. 147-154, 1999.