A procedure to estimate parameters of a line segment taking into account its representation through pi circuits: Theoretical development
Nenhuma Miniatura disponível
Data
2006-01-01
Autores
Kurokawa, S.
Pissolato, J.
Prado, A. J.
Título da Revista
ISSN da Revista
Título de Volume
Editor
IEEE
Resumo
The objective of this paper is to show an alternative methodology to estimate per unit length parameters of a line segment of a transmission line. With this methodology the line segment parameters can be obtained starting from the phase currents and -voltages in receiving and sending end of the line segment. If the line segment is represented as being one or more pi circuits whose frequency dependent parameters are considered lumped, its impedance and admittance can be easily expressed as functions of the currents and voltages at the sending and receiving end. Because we are supposing that voltages and currents at the sending and receiving end of the tine segment (in frequency domain) are known, it is possible to obtains its impedance and admittance and consequently its per unit length longitudinal and transversal parameters. The procedure will be applied to estimate the longitudinal and transversal parameters of a small segment of a single-phase line that is already built.
Descrição
Palavras-chave
frequency domain, modal transformation matrix, phase domain, transmission line parameters
Como citar
2006 Power Engineering Society General Meeting, Vols 1-9. New York: IEEE, p. 976-981, 2006.