Show simple item record

dc.contributor.authorSantana, Jerusa G. A. [UNESP]
dc.contributor.authorMinatti, Jose L.
dc.contributor.authorde Campos, Elson
dc.contributor.authorMelo, Francisco C. L.
dc.contributor.authorKajita, Tetunori
dc.date.accessioned2014-05-20T13:17:54Z
dc.date.available2014-05-20T13:17:54Z
dc.date.issued2008-01-01
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/MSF.591-593.685
dc.identifier.citationAdvanced Powder Technology Vi. Stafa-zurich: Trans Tech Publications Ltd, v. 591-593, p. 685-690, 2008.
dc.identifier.issn0255-5476
dc.identifier.urihttp://hdl.handle.net/11449/4183
dc.description.abstractThe presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic material. on the other hand, the increase in solid load leads up to alterations in dispersion viscosity, increasing the thermal stresses during drying and sintering processes. In order to verify the solid percentage influence in ceramic final properties, samples were prepared with silicon carbide in different compositions using or not starch as binder agent and pore forming element. The characterization of the ceramic pieces was performed by superficial roughness measurements, porosity besides by optical and scanning electron microscopy. The results showed ceramics with SiC and starch presented physical and microscopic properties slightly higher in relation to those with only ceramic powder in their composition. The presence of organic material, agglomerated and foam during the forming were essential for the final properties of the studied samples.en
dc.format.extent685-690
dc.language.isoeng
dc.publisherTrans Tech Publications Ltd
dc.relation.ispartofAdvanced Powder Technology Vi
dc.sourceWeb of Science
dc.subjectceramicen
dc.subjectformingen
dc.subjectStarchen
dc.subjectporousen
dc.subjectsolid amountsen
dc.titleEFFECT of DIFFERENT SOLID AMOUNTS IN THE PHYSICAL and MICROSCOPICAL PROPERTIES of SiC POROUS CERAMICSen
dc.typeTrabalho apresentado em evento
dcterms.rightsHolderTrans Tech Publications Ltd
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationUNESP, Lab Ceram, Dept Mat & Tecnol, Jaboticabal, SP, Brazil
dc.description.affiliationUnespUNESP, Lab Ceram, Dept Mat & Tecnol, Jaboticabal, SP, Brazil
dc.identifier.doi10.4028/www.scientific.net/MSF.591-593.685
dc.identifier.wosWOS:000262481100117
dc.rights.accessRightsAcesso aberto
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Ciências Agrárias e Veterinárias, Jaboticabalpt
dc.relation.ispartofsjr0,180
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record