Recent Submissions

  • Influential factors in the adherence to the certified organic production system in relation to the profile of the establishments and rural producers in Brazil

    Scalco, Andréa Rossi Autor UNESP; De Oliveira, Sandra Cristina; Pinto, Leonardo de Barros Autor UNESP (Agroalimentaria, 2019) [Artigo]
    From 2011, the adoption of the organic seal through a process of product certification is mandatory for marketing in commercial establishments in Brazil, except for sales made directly in the municipalities of origin of ...
  • Analysis of the tool nose radius influence in the machining of a green ceramic material

    Gonçalves Júnior, Marcos Autor UNESP; de Angelo Sanchez, Luiz Eduardo Autor UNESP; França, Thiago Valle Autor UNESP; Fortulan, Carlos Alberto; da Silva, Rodrigo Henriques Lopes; Foschini, Cesar Renato Autor UNESP (International Journal of Advanced Manufacturing Technology, 2019) [Artigo]
    Advanced ceramics are applied to several technological applications, and they have special properties. However, the advanced ceramics have poor machinability at the sintered condition, the tool suffers a high tool wear ...
  • Application of CAMQL technique on external cylindrical grinding of aisi 4340 steel with CBN grinding wheel

    Fragoso, Kamira Miksza Autor UNESP; Francelin, Alan Polato Autor UNESP; Lopes, José Claudio Autor UNESP; Sanchez, Luiz Eduardo de Angelo Autor UNESP; de Melo, Hamilton José Autor UNESP; Lodi, Alexandre Araujo; Aguiar, Paulo Roberto Autor UNESP; Bianchi, Eduardo Carlos Autor UNESP (Revista Materia, 2019) [Artigo]
    The grinding process provides us with good surface finish and good dimensional and geometric precision. Also, ground pieces have a high added value due to this process being a finishing one and is commonly carried out in ...
  • Protein time-temperature sensor for intelligent starch polymers

    Santos, Carolina Toledo Autor UNESP; Veiga-Santos, Pricila Autor UNESP; Sestari, Patricia Autor UNESP; Sorrini, Nathalia Carvalho Autor UNESP; Roca, Roberto de Oliveira Autor UNESP (Journal Of Food Processing And Preservation, 2020) [Artigo]
    As alternative to conventional electronic time-temperature sensors, a natural, nontoxic, biodegradable, and thermochromic protein-based sensor was investigated exploring myoglobin and myoglobin-nitrite proteins ability in ...
  • ?Zebrafish as an animal model for food safety research: trends in the animal research?

    Bailone, Ricardo Lacava Autor UNESP; Aguiar, Luis de; Roca, Roberto de Oliveira Autor UNESP; Borra, Ricardo Carneiro; Correa, Tatiana; Junke, Helena; Silva Fukushima, Hirla Costa (Food Biotechnology, 2019) [Artigo]
    Toxicity studies in mammals continue to be the most appropriate model for predicting risk in humans, but they tend to be expensive and time-consuming. In the aftermath of the genetic sequencing of zebrafish (Danio rerio), ...
  • Sensorial characteristics of smoked meat of capybara

    Roca, R. D.; Veiga, N.; Neto, RBD; Cervi, R. C. (Pesquisa Agropecuaria Brasileira, 1999) [Artigo]
    The capybara (Hydrochoerus hydrochaeris) is a herbivore rodent, semiaquatic, and lives in a herd. It's docile with simple adaptation in confinament, and produces meat and skin of high quality. This research was designed ...
  • Thermal model for surface grinding application

    de Martini Fernandes, Lucas Autor UNESP; Lopes, José Claudio Autor UNESP; Ribeiro, Fernando Sabino Fonteque Autor UNESP; Gallo, Rubens; Razuk, Henrique Cotait; de Angelo Sanchez, Luiz Eduardo Autor UNESP; de Aguiar, Paulo Roberto Autor UNESP; de Mello, Hamilton José Autor UNESP; Bianchi, Eduardo Carlos Autor UNESP (International Journal of Advanced Manufacturing Technology, 2019) [Artigo]
    Due to the characteristics of the grinding process, thermal damage may occur in the workpiece surface, resulting in the rejection of a component and considerably increasing the production costs. This study aims to analyze ...
  • Poly L, DL-lactic acid, and composite poly l, DL-lactic acid/β-tricalcium phosphate-based bioabsorbable interference screw

    Santos, Alex E.; Braccialli, Alex L.; Vilela, Julio; Foschini, Cesar R. Autor UNESP; Sanchez, Luiz E. A. Autor UNESP (Polymer Composites, 2019) [Artigo]
    There has been a growing interest in the use of bioabsorbable polymers in interference screws for knee ligament reconstruction surgeries. This interest is driven by virtue of the relevant properties exhibited by these ...
  • Management of water resources in boi branco sub-basin -SP

    Neto, Givaldo Dantas Sampaio; Bianchi, Vinícius Rafael Autor UNESP; Pinto, Leonardo De Barros Autor UNESP; Román, Rodrigo Máximo Sánchez Autor UNESP (IRRIGA, 2018) [Artigo]
    Scarcity of water resources due to climatic factors or increase in consumption due to the intensity of some activities has generated conflicts in several regions of Brazil. Agriculture is responsible for 70% of water demand ...
  • Biodiversity conservation actions as a tool to improve the management of sustainable corporations and their needs ecosystem services

    Reale, Ricardo; Magro, Teresa Cristina; Ribas, Luiz Cesar Autor UNESP (Journal Of Cleaner Production, 2019) [Artigo]
    In the Anthropocene era, ecosystem productivity decreasing due to Global temperatures increasing and the biodiversity loss. Thus, are imperative that natural areas be explored under sustainable precepts, respecting and ...
  • Refrigeration capacity of silver nanofluids under electrohydrodynamic effect oriented to heat removal in machining process

    Fragelli, Renan Luis Autor UNESP; Sanchez, Luiz Eduardo de Angelo Autor UNESP; Ingraci Neto, Rubens Roberto Autor UNESP; Scalon, Vicente Luiz Autor UNESP (Experimental Thermal and Fluid Science, 2018) [Artigo]
    Nanofluids have been the focus of many laboratories and research centres which seek practical applications for them. Considering the challenges in machining process related with the high temperature in the cutting zone and ...
  • Quality of refrigerated raw milk from buffalo cows (bubalus bubalis bubalis) in different farms and seasons in Brazil

    Bailone, Ricardo Lacava Autor UNESP; Borra, Ricardo Carneiro; Roça, Roberto de Oliveira Autor UNESP; de Aguiar, Luis; Harris, Moira (Ciencia Animal Brasileira, 2017) [Artigo]
    The present research aimed to examine the chemical and microbiological characteristics of refrigerated raw milk collected from buffalo-only dairy herds from different farms and seasons. Samples were collected from twelve ...
  • Agrupamento de municípios do médio Paranapanema de acordo com a produção agropecuária local: Uma abordagem multivariada

    Bianchi, Vinícius Rafael Autor UNESP; de Oliveira, Sandra Cristina Autor UNESP; Pinto, Leonardo de Barros Autor UNESP; Andreoli, Ana Cláudia Autor UNESP; Garnica, Guilherme Besse Autor UNESP (Espacios, 2016) [Artigo]
    Agribusiness is one of the most important activities of the national economy and the state of São Paulo, with production diversity, forms of production and social formation. The objective of this study was to identify ...
  • Composted sewage sludge and steel mill slag as potential amendments for urban soils involved in afforestation programs

    Guerrini, Iraê Amaral Autor UNESP; Croce, Ciro Guilherme Gentil Autor UNESP; Bueno, Osmar de Carvalho Autor UNESP; Jacon, Camila Paula Rossetto Pescatori Autor UNESP; Nogueira, Thiago Assis Rodrigues Autor UNESP; Fernandes, Dirceu Maximino Autor UNESP; Ganga, Antonio; Capra, Gian Franco (Urban Forestry and Urban Greening, 2017) [Artigo]
    This study aimed to assess the impacts of composted sewage sludge and steel mill slag on urban soil fertility and tree growth. The research was conducted in an urban area (Botucatu, State of São Paulo, Brazil) characterised ...
  • A New Proposal Using a Turbine in the Reactor with a Cavitation System in the Biodiesel Synthesis

    Ferreira, Sérgio L. Autor UNESP; Módolo, Délson L. Autor UNESP; Scalon, Vicente L. Autor UNESP; Sanchez, Luiz E. A. Autor UNESP; Avallone, Elson; Polito, Wagner L. (Waste and Biomass Valorization, 2017) [Artigo]
    The present research investigates the effect of a cavitation system with a turbine in comparison to the vigorous stirring on the process of biodiesel synthesis by the transesterification reaction using oil (triglycerides) ...
  • Performance and carcass characteristics of cattle fed lipid sources in the diet

    Lima, Erico da Silva; de Morais, Jozivaldo Prudêncio Gomes; Roça, Roberto de Oliveira Autor UNESP; Valente, Tiago Neves Pereira; de Andrade, Ernani Nery; Deminicis, Bruno Borges (Canadian Journal of Animal Science, 2016) [Artigo]
    The aim of this study was to determine the effect of the inclusion of different lipid sources [whole cottonseed (CS) and protected fat in diets containing sugarcane, corn, citrus pulp, CS meal, and urea] on animal performance, ...
  • Machining with Internally Cooled Toolholder Using a Phase Change Fluid

    Sanchez, Luiz Eduardo De Angelo Autor UNESP; Neto, Rubens Roberto Ingraci Autor UNESP; Fragelli, Renan Luis Autor UNESP; Junior, Carlos Elias Da Silva; Scalon, Vicente Luiz Autor UNESP (Procedia CIRP, 2016) [Trabalho apresentado em evento]
    The cutting fluid application is the most usual method for cooling the cutting tool, however it is harmful to the environment and to the human being health, besides it represents a significative part of the production ...
  • Indirect cooling of the cutting tool with a pumped two-phase system in turning of AISI 1045 steel

    Ingraci Neto, Rubens R. Autor UNESP; Scalon, Vicente L. Autor UNESP; Fiocchi, Arthur A. Autor UNESP; Sanchez, Luiz E. A. Autor UNESP (International Journal of Advanced Manufacturing Technology, 2016) [Artigo]
    The elimination of cutting fluids’ usage is one of the great challenges of sustainable manufacturing. Various devices and alternative techniques have been developed, but their results are limited, as well as their commercial ...
  • The ultra-precision Ud-lap grinding of flat advanced ceramics

    Fiocchi, Arthur Alves; De Angelo Sanchez, Luiz Eduardo Autor UNESP; Lisboa-Filho, Paulo Noronha Autor UNESP; Fortulan, Carlos Alberto (Journal of Materials Processing Technology, 2016) [Artigo]
    The present study focuses on the Ud-lap grinding process and its machine-tool design aiming at ultra-precision (UP) manufacturing of advanced ceramics. Impacts of three different overlapping factors on a dressing (Ud) and ...

View more