Show simple item record

dc.contributor.authorBianchi, Eduardo Carlos [UNESP]
dc.contributor.authorMonici, Rodrigo Daun [UNESP]
dc.contributor.authorDa Silva, Eraldo Jannone [UNESP]
dc.contributor.authorDe Aguiar, Paulo Roberto [UNESP]
dc.date.accessioned2014-05-27T11:20:17Z
dc.date.available2014-05-27T11:20:17Z
dc.date.issued2001-07-01
dc.identifier.citationCiencia y Engenharia/ Science and Engineering Journal, v. 10, n. 2, p. 85-92, 2001.
dc.identifier.issn0103-944X
dc.identifier.urihttp://hdl.handle.net/11449/66544
dc.description.abstractGrinding is a precision machining process which is widely used in the manufacture of components requiring fine tolerances and smooth surfaces. There are several imput parameters (cutting conditions, cutting fluid and grinding wheel type used, dressing conditions etc.) which can affect the process variables (tangential and normal cutting forces, roughness, grinding temperatures, G ratio, etc.) leading to differences in the roughness, in the surface integrity and in the mechanical strength of the ground component. Consequently, the imput parameters must be controlled in order to insure the workpiece final quality. This paper presents a comparative evaluation of the performance of two types of grinding wheels [a conventional (Al2O3) and a superabrasive (CBN)] when grinding a VC131 steel, by the analysis of specific process variables when varying the cutting conditions. Highest values of G ratio and lowest workpiece roughness was observed when using CBN grinding wheels. This confirms the global trend of replacement of alumina grinding wheels by CBN, when grinding DTG (difficult to grind) materials.en
dc.format.extent85-92
dc.language.isopor
dc.relation.ispartofCiencia y Engenharia/ Science and Engineering Journal
dc.sourceScopus
dc.subjectAlumina
dc.subjectCBN
dc.subjectResin bond
dc.subjectVC 131 steel
dc.subjectAbrasives
dc.subjectCutting fluids
dc.subjectGrinding (machining)
dc.subjectSteel
dc.subjectStrength of materials
dc.subjectSurface roughness
dc.subjectSuperabrasives
dc.subjectGrinding wheels
dc.titleEstudo comparativo do desempenho de rebolos com grãos superabrasivos e convencionaispt
dc.title.alternativeComparative evaluation of the performance of conventional and superabrasive grinding wheelsen
dc.typeArtigo
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.description.affiliationUniversidade Estadual Paulista Faculdade de Engenharia UNESP, Cx. P. 473, 17033-360 Bauru, SP
dc.description.affiliationUnespUniversidade Estadual Paulista Faculdade de Engenharia UNESP, Cx. P. 473, 17033-360 Bauru, SP
dc.rights.accessRightsAcesso restrito
dc.identifier.scopus2-s2.0-0035410436
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Baurupt
dc.identifier.lattes1099152007574921
dc.identifier.lattes1455400309660081
unesp.author.lattes1099152007574921
unesp.author.lattes1455400309660081
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record