Show simple item record

dc.contributor.authorNunes, Perseu Amaral
dc.contributor.authorRamos, Alfeu Saraiva [UNESP]
dc.contributor.authorTrindade Ramos, Erika Coaglia
dc.date.accessioned2014-05-27T11:27:10Z
dc.date.available2014-05-27T11:27:10Z
dc.date.issued2012-11-26
dc.identifierhttp://dx.doi.org/10.4028/www.scientific.net/MSF.727-728.216
dc.identifier.citationMaterials Science Forum, v. 727-728, p. 216-221.
dc.identifier.issn0255-5476
dc.identifier.urihttp://hdl.handle.net/11449/73757
dc.description.abstractThis paper discusses on effect of molybdenum on the Ti6Si2B formation in mechanically alloyed and hot-pressed Ti-xMo-22Si-11B (x= 2, 5, 7 and 10 at%) alloys. High-energy ball milling and hot pressing were utilized to produce homogeneous and dense materials, which were characterized by scanning electron microscopy, X-ray diffraction, electron dispersive spectrometry, and Vickers hardness. The excessive agglomeration during milling was more pronounced in Moricher powders, which was minimized with the formation of brittle phases. Hot pressing of mechanically alloyed Ti-xMo-22Si-11B powders produced dense samples containing lower pore amounts than 1%. Ti6Si2B was formed in microstructure of the hot-pressed Ti-2Mo-22Si-11B alloy only. In Mo-richer quaternary alloys, the Ti3Si and Ti5Si3 phases were preferentially formed during hot pressing. Oppositely to the ternary phase, the Ti3Si phase dissolved a significant Mo amount. Vickers hardness values were reduced in hot-pressed Ti-xMo-22Si-11B alloys containing larger Mo amounts, which were dissolved preferentially in Ti solid solution. © (2012) Trans Tech Publications, Switzerland.en
dc.format.extent216-221
dc.language.isoeng
dc.relation.ispartofMaterials Science Forum
dc.sourceScopus
dc.subjectHigh-energy ball milling
dc.subjectHot pressing
dc.subjectTitanium alloy
dc.subjectDense materials
dc.subjectMechanically alloyed
dc.subjectQuaternary alloys
dc.subjectTernary phase
dc.subjectAlloys
dc.subjectBall milling
dc.subjectMolybdenum
dc.subjectMolybdenum alloys
dc.subjectPowders
dc.subjectScanning electron microscopy
dc.subjectSilicon
dc.subjectX ray diffraction
dc.subjectTitanium alloys
dc.titleEffect of molybdenum on the formation of Ti6Si2B in mechanically alloyed Ti-Mo-Si-B powdersen
dc.typeTrabalho apresentado em evento
dcterms.licensehttp://www.ttp.net/Downloads.html
dc.contributor.institutionInstituto de Pesquisa e Desenvolvimento
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionInstituto de Ciência e Tecnologia
dc.description.affiliationUniversidade do Vale do Paraíba Instituto de Pesquisa e Desenvolvimento, Av. Shishima Hifumi 2911, 12244-000 São José dos Campos-SP
dc.description.affiliationUniversidade Estadual Paulista Faculdade de Engenharia de Guaratinguetá Departamento de Materiais e Tecnologia, Av. Ariberto Pereira da Cunha 333, 12506-410 Guaratinguetá-SP
dc.description.affiliationUniversidade Federal de Alfenas Campus de Poços de Caldas Instituto de Ciência e Tecnologia, Rodovia José Aurélio Vilela 11999, 37715-400 Poços de Caldas-MG
dc.description.affiliationUnespUniversidade Estadual Paulista Faculdade de Engenharia de Guaratinguetá Departamento de Materiais e Tecnologia, Av. Ariberto Pereira da Cunha 333, 12506-410 Guaratinguetá-SP
dc.identifier.doi10.4028/www.scientific.net/MSF.727-728.216
dc.rights.accessRightsAcesso aberto
dc.identifier.scopus2-s2.0-84869478486
unesp.campusUniversidade Estadual Paulista (UNESP), Faculdade de Engenharia, Guaratinguetápt
dc.relation.ispartofsjr0,180
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record