Effect of fiber surface on flexural strength in carbon fabric reinforced epoxy composites
Data de publicação2013-06-01
Direito de acesso
MetadadosExibir registro completo
The effect of carbon fiber surface characteristics on flexural properties of structural composites is studied in this work. Two types of intermediate modulus carbon fibers were used: T800HB and IM7. Results revealed that higher mechanical properties are linked with higher interfacial adhesion. Morphologies and chemical compositions of commercial carbon fibers (CF) were characterized by Fourier Transformed Infra Red (FTIR) and Scanning Electronic Microscopy (SEM). Comparing the results, the T800HB apparently has more roughness, since the IM7 seems to be recovered for a polymeric film. On other hand, the IM7 one shows higher interactivity with epoxy resin system Cycom 890 RTM. Composites produced with Resin Transfer Molding (RTM) were tested on a flexural trial. Interfacial adhesion difference was showed with SEM and Dynamic Mechanical Analyses (DMA), justifying the higher flexural behavior of composites made with IM7 fibers. © 2013 Elsevier B.V. All rights reserved.
Como citar este documento
Este item aparece nas seguintes coleções
Exibindo os itens relacionados pelo título, autor e palavra-chave.
Evaluation of marginal microleakage in Class II cavities: Effect of microhybrid, flowable, and compactable resins Peris, Alessandra Rezende; Duarte Jr., Sillas ; Andrade, Marcelo Ferrarezi de (Quintessence International, 2003) [Artigo]Objective: The goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class II restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). ...
Tonetto, Mateus Rodrigues; Pinto, Shelon Cristina Souza; Rastelli, Alessandra de Nara Souza; Borges, Alvaro Henrique; Saad, José Roberto Cury ; Pedro, Fábio Luis Miranda; Andrade, Marcelo Ferrarezi de ; Bandéca, Matheus Coelho (Journal of Contemporary Dental Practice, 2013) [Artigo]Aims and objectives: The behavior of polymer-matrix composite is dependent on the degree of conversion. The aim of this study was to evaluate the degree of conversion of two resin cements following storage at 37°C immediately, ...
Myaki, S. I.; Rodrigues, C. R.; Raggio, D. P.; Flores, T. A.; Matson, M. R. (Brazilian Dental Journal, 2001) [Artigo]The aim of this in vitro study was to evaluate marginal leakage in class V restorations in primary teeth restored with amalgam, using three different techniques. Thirty maxillary anterior primary teeth, clinically sound ...