Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning
MetadataShow full item record
The application of minimum quantity lubrication (MQL) in grinding has emerged as an alternative for reducing the abundant flow of cutting fluids, thus achieving cleaner production. Although considered an innovative technique in grinding operations, its widespread application is hindered due primarily to the high heat generation and wheel pore clogging caused by machined chips, harming the final product quality and increasing tool wear on the machine. This study sought to improve MQL use in grinding. In addition to the conventional MQL injected at the wheel/workpiece interface, a compressed air jet was used to clean the mixture of MQL oil and machined chips from clogged wheel pores. Experiments were conducted using external cylindrical plunge grinding on AISI 4340 quenched and tempered steel, and a vitrified cubic boron nitrite (CBN) wheel. The cooling-lubrication methods employed were the conventional flood coolant application, MQL (without cleaning), and MQL with a cleaning jet directed at the wheel surface at different angles of incidence. The main goal of these experiments was to verify the viability of replacing the traditional abundant flow of cutting fluid with MQL and wheel cleaning. The analyses were conducted by measuring the following output variables of the process: workpiece surface roughness and roundness errors, diametrical wheel wear, acoustic emission generated by the process, and metallographic images of the ground surface and subsurface. Results show the positive effects of implementing the cleaning jet technique as a technological improvement of minimum quantity lubrication in grinding in order to reduce the usage of cutting fluids. The MQL technique with cleaning compressed air jet, for a specific angle of incidence (30 degrees), proved to be extremely efficient in the improvement of the surface quality and accurate workpiece shape; it also reduced wheel wear when compared to the other cooling-lubrication methods that were tested (without a cleaning jet). (C) 2012 Elsevier B.V. All rights reserved.
How to cite this document
Showing items related by title, author, creator and subject.
Pinho, Sheila Zambello de ; Oliveira, José Brás Barreto de ; Gazola, Rodrigo José Cristiano ; Mazotti, Adriano César ; Molero, Camila Schimite ; Mendes, Carolina Borghi ; Mello, Denise Fernandes de ; Marques, Emilia de Mendonça Rosa ; Talamoni, Jandira Liria Biscalquini ; Silva, José Humberto Dias da et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
Pinho, Sheila Zambello de ; Oliveira, José Brás Barreto de ; Pontes, Sueli Rodrigues ; Almeida, Djanira Soares de Oliveira e ; Godoy, Kathya Maria Ayres de ; Rosa, Claudia de Souza ; Nunes, Julianus Araújo ; Salvador, Sérgio Azevedo ; David, Célia Maria ; Vilche Peña, Angel Fidel et al. (Coleção PROGRAD (UNESP), 2011) [Livro]
Pinho, Sheila Zambello de ; Spazziani, Maria de Lourdes ; Mendonça, Sueli Guadelupe de Lima ; Rubo, Elisabete Aparecida Andrello ; Villarreal, Dalva Maria de Oliveira ; Duarte, Camila ; Okamoto, Mary Yoko ; Souza, Thais R. ; Garms, Gilza Maria Zauhy ; Marin, Fátima Aparecida Dias Gomes et al. (Coleção PROGRAD (UNESP), 2012) [Livro]