Metodologia dos observadores de estado para diagnose de falhas em sistemas contendo elementos finitos de placas de Kirchoff
Carregando...
Data
2009-02-05
Autores
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
O presente trabalho apresenta a metodologia dos observadores de estado para a detecção e localização de falhas em sistemas contendo elementos finitos de placas de Kirchoff. Tal metodologia consiste na montagem de um banco de observadores de estado, o qual é capaz de detectar falhas presentes no sistema, além de localizar o componente danificado e a porcentagem de falha. As matrizes de ganho dos observadores de estado foram determinadas por dois métodos distintos: o método Regulador Quadrático Linear e das Desigualdades Matriciais Lineares. Nesse trabalho, foi utilizada uma placa plana fina montada sobre um sistema de suspensão similar ao de uma plataforma veicular, representando um veiculo simplificadamente. A modelagem da plataforma utilizada foi realizada mediante a utilização do método dos elementos finitos, considerando-se diferentes números de elemento no modelo. O tipo do elemento finito utilizado foi o elemento de placa de Kirchoff. Adicionalmente foi analisada a influência de elementos de controle junto à suspensão da plataforma no movimento da mesma. O modelo considerado, juntamente com os programas computacionais desenvolvidos, foram utilizados para a simulação do movimento da plataforma. Na literatura, normalmente são apresentadas simulações para o movimento de apenas ¼ do veículo, neste trabalho, no entanto, os programas desenvolvidos podem simular o movimento do veiculo inteiro. Foram realizadas simulações computacionais para o movimento da plataforma com a finalidade de se detectar e localizar falhas introduzidas nos elementos da suspensão e também foram realizados testes experimentais, com os mesmos fins. Mediante tais testes (teóricos e experimentais) verificou-se a eficácia da metodologia desenvolvida e a sua principal limitação: o número de elementos finitos considerado no modelo relacionado com o número de medidas efetuadas e a observabilidade do sistema.
This work presents the state observers methodology for the detection and location of faults in systems containing finite elements of plate of Kirchoff. This methodology consists in the assembly of a bank of state observers, which is capable of detecting faults in the system, and also to locate the damaged component and the percentage of failure. The gain matrices of the state observers were determined by two different methods, these are the method Linear Quadratic Regulator and the Linear Matrix Inequalities. In this work was considered a thin plate mounted on a suspension system that is similar to a vehicle platform, representing a vehicle in a simplified way. The modeling of the platform used was performed by using the finite element method, considering different numbers of element in the model. The finite element used was the Kirchoff’s plate element. It was also studied the influence of elements of control, together with the suspension of the platform, into its movement. The model considered, together with the developed computational programs, were used to simulate the movement of the platform. In the literature, usually are presented simulations for the movement of only ¼ of the vehicle, in this work, the developed programs can simulate the movement of the entire vehicle. It was realized computational simulations for the movement of the platform in order to detect and locate faults introduced in the elements of the suspension and experimental tests were also conducted with the same purpose. Through such tests (theoretical and experimental) it was verified the effectiveness of the developed methodology and its major limitation: the number of finite elements considered in the model related with the number of outputs and the observability of the system.
This work presents the state observers methodology for the detection and location of faults in systems containing finite elements of plate of Kirchoff. This methodology consists in the assembly of a bank of state observers, which is capable of detecting faults in the system, and also to locate the damaged component and the percentage of failure. The gain matrices of the state observers were determined by two different methods, these are the method Linear Quadratic Regulator and the Linear Matrix Inequalities. In this work was considered a thin plate mounted on a suspension system that is similar to a vehicle platform, representing a vehicle in a simplified way. The modeling of the platform used was performed by using the finite element method, considering different numbers of element in the model. The finite element used was the Kirchoff’s plate element. It was also studied the influence of elements of control, together with the suspension of the platform, into its movement. The model considered, together with the developed computational programs, were used to simulate the movement of the platform. In the literature, usually are presented simulations for the movement of only ¼ of the vehicle, in this work, the developed programs can simulate the movement of the entire vehicle. It was realized computational simulations for the movement of the platform in order to detect and locate faults introduced in the elements of the suspension and experimental tests were also conducted with the same purpose. Through such tests (theoretical and experimental) it was verified the effectiveness of the developed methodology and its major limitation: the number of finite elements considered in the model related with the number of outputs and the observability of the system.
Descrição
Palavras-chave
Método dos elementos finitos, Observadores de estado, Regulador quadrático linear, Desigualdades matriciais lineares, Servoválvula, State observers, Linear quadratic regulator, Linear matrix inequalities, Finit elements method, Servovalve
Como citar
MONTE ALEGRE, Dário. Metodologia dos observadores de estado para diagnose de falhas em sistemas contendo elementos finitos de placas de Kirchoff. 2009. 131 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Engenharia de Ilha Solteira, 2009.