Solid-state hydrolysis of postconsumer polyethylene terephthalate after plasma treatment
Nenhuma Miniatura disponível
Data
2013-02-05
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
Plasma treatments were applied on the surface of postconsumer polyethylene terephthalate (PET) bottles to increase their wettability and hasten the subsequent hydrolysis process. Sixty-four treatments were tested by varying plasma composition (oxygen and air), power (25-130 W), pressure (50-200 mTorr), and time (1 and 5 min). The best treatment was the one applied in air plasma at 130 W and 50 mTorr for 5 min, as it provided the lowest contact angle, 9.4°. Samples of PET before and after the optimized plasma condition were subjected to hydrolysis at 205°C. Although the treatment changed only a thin surface layer, its influence was evident up to relatively high conversion rates, as the treated samples presented more than 40% higher conversion rates than the untreated ones after 2 h of reaction. Infrared spectroscopy showed that the terephthalic acid obtained from 99% of depolymerization was similar to the commercial product used in PET synthesis. © 2012 Wiley Periodicals, Inc.
Descrição
Palavras-chave
plasma treatment, polyesters, recycling, surface modification, Air plasmas, Commercial products, Conversion rates, High conversions, Plasma composition, Plasma conditions, Plasma treatment, Subsequent hydrolysis, Terephthalic acids, Thin surface layer, Contact angle, Infrared spectroscopy, Plasma applications, Polyesters, Polyethylene terephthalates, Reaction rates, Recycling, Surface treatment, Synthesis (chemical), Hydrolysis
Idioma
Inglês
Como citar
Journal of Applied Polymer Science, v. 127, n. 3, p. 1989-1996, 2013.