Does Adhesive Resin Application Contribute to Resin Bond Durability on Etched and Silanized Feldspathic Ceramic?

dc.contributor.authorPassos, Sheila Pestana [UNESP]
dc.contributor.authorValandro, Luiz Felipe
dc.contributor.authorAmaral, Regina [UNESP]
dc.contributor.authorOzcan, Mutlu
dc.contributor.authorBottino, Marco Antonio [UNESP]
dc.contributor.authorKimpara, Estevão Tomomitsu [UNESP]
dc.contributor.institutionUniversidade Federal de Santa Maria (UFSM)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversity of Groningen
dc.date.accessioned2014-05-20T14:05:00Z
dc.date.available2014-05-20T14:05:00Z
dc.date.issued2008-12-01
dc.description.abstractPurpose: To assess the effect of adhesive application and aging on the bond durability of resin cement to etched and silanized feldspathic ceramic.Materials and Methods: Twenty blocks (6.4 x 6.4 x 4.8 mm) of feldspathic ceramic (Vita VM7) were produced. The ceramic surfaces were conditioned with 10% hydrofluoric acid gel for 60 s and silanized. They were then randomly divided into two groups. While half of the group received no adhesive, in the other half, a layer of adhesive (Scotchbond Multi-Purpose Plus) was applied. Each ceramic block was then placed in its silicone mold with the treated surface exposed. The dual-cured resin cement (Variolink 11) was injected into the mold over the treated surface and polymerized. Specimens were sectioned to achieve nontrimmed bar specimens (approximately 12 sticks/block) that were randomly divided into 2 groups: a) non-aged - microtensile bond test immediately after sectioning; b) aged-thermocycling (TC) 12,000 times, 5 degrees C to 55 degrees C, and water storage (50 days). The microtensile bond strength test was performed in a universal testing machine (crosshead speed: 1 mm/min). The failure types were examined using an optical light microscope and SEM. Bond strength results were analyzed using two-way ANOVA and Tukey's test (alpha = 0.05).Results: The adhesive application affected the bond strength results significantly (p = 0.0001) (without adhesive > with adhesive). While aging conditions did not reduce the bond strength in the groups that received no adhesive (20 +/- 5.3 MPa non-aged and 21.5 +/- 5.6 aged) (p = 0.1698), it significantly affected the bond strength results of the group with adhesive application (18 +/- 4.4 MPa to 14.4 +/- 4.7 MPa) (p < 0.001). All groups showed mainly mixed type of failures between the ceramic and the resin cement (81% to 100%). The group in which no adhesive was applied presented a higher incidence of cohesive failure of ceramic after aging (18%) than those of the other groups.Conclusion: The use of adhesive did not improve resin cement adhesion to the etched and silanized feldspathic ceramic after long-term thermocycling and water storage.en
dc.description.affiliationUniversidade Federal de Santa Maria (UFSM), Sch Dent, Dept Restorat Dent, Div Prosthodont, BR-97015372 Santa Maria, RS, Brazil
dc.description.affiliationSão Paulo State Univ Sao Jose Campos, Dept Dent Mat & Prosthodont, São Paulo, Brazil
dc.description.affiliationUniv Groningen, Univ Med Ctr Groningen, Dept Dent & Dent Hyg, Groningen, Netherlands
dc.description.affiliationUnespSão Paulo State Univ Sao Jose Campos, Dept Dent Mat & Prosthodont, São Paulo, Brazil
dc.description.sponsorshipCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
dc.format.extent455-460
dc.identifierhttp://dx.doi.org/10.3290/j.jad.a14148
dc.identifier.citationJournal of Adhesive Dentistry. Hanover Park: Quintessence Publishing Co Inc, v. 10, n. 6, p. 455-460, 2008.
dc.identifier.doi10.3290/j.jad.a14148
dc.identifier.issn1461-5185
dc.identifier.lattes9234456003563666
dc.identifier.lattes0967916388665754
dc.identifier.orcid0000-0003-0586-4644
dc.identifier.urihttp://hdl.handle.net/11449/22796
dc.identifier.wosWOS:000263248500007
dc.language.isoeng
dc.publisherQuintessence Publishing Co Inc
dc.relation.ispartofJournal of Adhesive Dentistry
dc.relation.ispartofjcr1.691
dc.relation.ispartofsjr0,839
dc.rights.accessRightsAcesso restrito
dc.sourceWeb of Science
dc.subjectacid etchingen
dc.subjectbond durabilityen
dc.subjectglass ceramicen
dc.subjectmicrotensile testen
dc.subjectresin cementen
dc.titleDoes Adhesive Resin Application Contribute to Resin Bond Durability on Etched and Silanized Feldspathic Ceramic?en
dc.typeArtigo
dcterms.licensehttp://www.quintpub.com/journals/jad/permissions.php
dcterms.rightsHolderQuintessence Publishing Co Inc
unesp.author.lattes9234456003563666
unesp.author.lattes0967916388665754[6]
unesp.author.orcid0000-0003-0586-4644[6]
unesp.campusUniversidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, São José dos Campospt
unesp.departmentMateriais Odontológicos e Prótese - ICTpt

Arquivos

Licença do Pacote

Agora exibindo 1 - 2 de 2
Nenhuma Miniatura disponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição:
Nenhuma Miniatura disponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição: