## Sub-Optimal Orbital Maneuvers for Artificial Satellites

Nenhuma Miniatura disponível

##### Data

2008-01-01

##### Autores

Vaz, Bruno Nunes [UNESP]

Bertachini de Almeida Prado, Antonio Fernando

Mastorakis, NE

Demiralp, M

Mladenov,

Bojovic, Z

##### Título da Revista

##### ISSN da Revista

##### Título de Volume

##### Editor

World Scientific and Engineering Acad and Soc

##### Resumo

The determination of a specific orbit and the procedure to calculate orbital maneuvers of artificial satellites are problems of extreme importance in the study of orbital mechanics. Therefore, the transferring problem of a spaceship from one orbit to another, and the attention due to this subject has in increased during the last years. Many applications can be found in several space activities, for example, to put a satellite in a geostationary orbit, to change the position of a spaceship, to maintain a specific satellite's orbit, in the design of an interplanetary mission, and others. The Brazilian Satellite SCD-1 (Data Collecting Satellite) will be used as example in this paper. It is the first satellite developed entirely in Brazil, and it remains in operation to this date. SCD-1 was designed, developed, built, and tested by Brazilian scientists, engineers, and technicians working at INPE (National Institute for Space Research, and in Brazilian Industries. During the lifetime, it might be necessary do some complementary maneuvers, being this one either an orbital transferring, or just to make periodical corrections. The purpose of transferring problem is to change the position, velocity and the satellite's mass to a new pre determined state. This transfer can be totally linked (in the case of "Rendezvous") or partially free (free time, free final velocity, etc). In the global case, the direction, the orientation and the magnitude of the thrust to be applied must be chosen, respecting the equipment's limit. In order to make this transferring, either sub-optimal or optimal maneuvers may be used. In the present study, only the sub-optimal will be shown. Hence, this method will simplify the direction of thrust application, to allow a fast calculation that may be used in real time, with a very fast processing. The thrust application direction to be applied will be assumed small and constant, and the purpose of this paper is to find the time interval that the thrust is applied. This paper is basically divided into three parts: during the first one the sub-optimal maneuver is explained and detailed, the second presents the Satellite SCD-1, and finally the last part shows the results using the sub-optimal maneuver applied to the Brazilian Satellite.

##### Descrição

##### Palavras-chave

Astrodynamics, Spatial Mechanics, Brazilian Satellites, Orbital Maneuvers, Space Trajectories

##### Como citar

Proceedings of The 8th Wseas International Conference on Systems Theory and Scientific Computation (istac'08). Athens: World Scientific and Engineering Acad and Soc, p. 223-228, 2008.