Analysis of the Cutting Parameters in Front Milling for Medium Density Fiberboard

dc.contributor.authorDeus, Priscila R.
dc.contributor.authorAlves, Manoel C. S. [UNESP]
dc.contributor.authorVieira, Fabio H. A.
dc.contributor.authorBilesky, Luciano R.
dc.contributor.institutionFac Technol
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2018-11-26T17:48:58Z
dc.date.available2018-11-26T17:48:58Z
dc.date.issued2018-01-01
dc.description.abstractMedium density fiberboard (MDF) is an industrial product manufactured from lignocellulosic fibers. It has homogeneity, dimensional stability, and mechanical strength compared with solid wood. Milling is a machining method widely used in the furniture industry; despite the relevance of the subject, there are few works dealing with the specific MDF milling process using computerized numerical control (CNC) machines. This study evaluated MDF milling in CNC machining centers by analyzing roughness. The MDF panels were front direction with the machined cut depth of 3 mm with six replicates, four cutting speeds of 804 m/min, 603 m/min, 402 m/min, and 201 m/min, and one forward speed of 4 m/min. The parameter of roughness average (R-a) was analyzed. The results showed that the surface roughness showed lower values for the cutting speeds of 603 m/min and 804 m/min, and cutting depths of 3 mm exhibited satisfactory results for the front surface. In conclusion, the parameters studied here significantly influence the finish, resulting in uneven surfaces that can reduce the quality of products.en
dc.description.affiliationFac Technol, Dept Forestry, Capao Bonito, SP, Brazil
dc.description.affiliationUNESP, Mech Engn Dept, Guaratingueta, SP, Brazil
dc.description.affiliationUnespUNESP, Mech Engn Dept, Guaratingueta, SP, Brazil
dc.format.extent3404-3410
dc.identifierhttp://dx.doi.org/10.15376/biores.13.2.3404-3410
dc.identifier.citationBioresources. Raleigh: North Carolina State Univ Dept Wood & Paper Sci, v. 13, n. 2, p. 3404-3410, 2018.
dc.identifier.doi10.15376/biores.13.2.3404-3410
dc.identifier.issn1930-2126
dc.identifier.urihttp://hdl.handle.net/11449/164065
dc.identifier.wosWOS:000429205100090
dc.language.isoeng
dc.publisherNorth Carolina State Univ Dept Wood & Paper Sci
dc.relation.ispartofBioresources
dc.relation.ispartofsjr0,405
dc.rights.accessRightsAcesso restrito
dc.sourceWeb of Science
dc.subjectPanels
dc.subjectRoughness
dc.subjectFinishing wood
dc.subjectWood
dc.titleAnalysis of the Cutting Parameters in Front Milling for Medium Density Fiberboarden
dc.typeArtigo
dcterms.rightsHolderNorth Carolina State Univ Dept Wood & Paper Sci

Arquivos