Co-doped p-type ZnO:Al-N thin films grown by RF-Magnetron sputtering at room temperature

dc.contributor.authorRamos, Raul [UNESP]
dc.contributor.authorde Godoy, Marcio Peron Franco
dc.contributor.authorRangel, Elidiane Cipriano [UNESP]
dc.contributor.authorda Cruz, Nilson Cristino [UNESP]
dc.contributor.authorDurrant, Steven F. [UNESP]
dc.contributor.authorBortoleto, José Roberto Ribeiro [UNESP]
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversidade Federal de São Carlos (UFSCar)
dc.date.accessioned2021-06-25T11:05:10Z
dc.date.available2021-06-25T11:05:10Z
dc.date.issued2020-08-01
dc.description.abstractThis study reports the structural properties of zinc oxide thin films co-doped with aluminum and nitrogen (ZnO:Al-N) grown by RF magnetron sputtering from an AZO (ZnO with 2 wt% Al2O3) target under nitrogen (N2) atmosphere at room temperature (RT). Nitrogen partial pressures of 0.00, 0.10, 0.25 and 1.00 mTorr were used. The film thickness was around 270 nm. Ultraviolet-Vis-NIR transmittance (T) spectra of the films revealed T values of 80 to 85% in the 400 to 700 nm wavelength range. XRD results indicated that the films had a hexagonal wurtzite structure and were preferentially oriented in the (002) plane. Analyses by EDS indicated that the N atoms tend to be incorporated into the ZnO matrix at the expense of oxygen atoms. The ideal [N]/[Al] was obtained at a N2 partial pressure of 0.25 mTorr, producing a p-type film. For a [N]/[Al] of 1.53, the film also exhibited p-type conduction with an electrical resistivity of 31.92 Ω cm, mobility of 18.65 cm2/V s and carrier density of 1.22 x 1016 cm-3. The low carrier density is attributed to the energetically favorable formation of inactive nitrogen phases instead of acceptor-receiver-acceptor complexes, even at the ideal [N]/[Al].en
dc.description.affiliationUniversidade Estadual Paulista (UNESP) Instituto de Ciência e Tecnologia de Sorocaba
dc.description.affiliationUniversidade Federal de São Carlos (UFSCar) Departamento de Física
dc.description.affiliationUnespUniversidade Estadual Paulista (UNESP) Instituto de Ciência e Tecnologia de Sorocaba
dc.identifierhttp://dx.doi.org/10.1590/1980-5373-MR-2020-0049
dc.identifier.citationMaterials Research, v. 23, n. 3, 2020.
dc.identifier.doi10.1590/1980-5373-MR-2020-0049
dc.identifier.fileS1516-14392020000300221.pdf
dc.identifier.issn1980-5373
dc.identifier.issn1516-1439
dc.identifier.scieloS1516-14392020000300221
dc.identifier.scopus2-s2.0-85092232107
dc.identifier.urihttp://hdl.handle.net/11449/208028
dc.language.isoeng
dc.relation.ispartofMaterials Research
dc.rights.accessRightsAcesso aberto
dc.sourceScopus
dc.subjectCo-doping
dc.subjectP-type doping
dc.subjectRoom temperature
dc.subjectZinc oxide
dc.subjectZnO:Al-N
dc.titleCo-doped p-type ZnO:Al-N thin films grown by RF-Magnetron sputtering at room temperatureen
dc.typeArtigo
unesp.campusUniversidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, Sorocabapt
unesp.departmentEngenharia de Controle e Automação - ICTSpt

Arquivos

Pacote Original

Agora exibindo 1 - 1 de 1
Carregando...
Imagem de Miniatura
Nome:
S1516-14392020000300221.pdf
Tamanho:
2.17 MB
Formato:
Adobe Portable Document Format