PTCa/PEEK composite acoustic emission sensors

Nenhuma Miniatura disponível

Data

2006-10-01

Autores

Sakamoto, Walter K. [UNESP]
Malmonge, José A. [UNESP]
Malmonge, Luiz F. [UNESP]
Da Silva, Alberto F.G. [UNESP]
Higuti, Ricardo T. [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Resumo

Composites made of Calcium-modified lead titanate (PTCa) and poly (ether-etherketone) (PEEK) high performance polymer matrix were prepared in the film form using a hot press. The ceramic volume fraction reaches up to 60 percent providing a composite with 0-3 and 1-3 mixed connectivities due to the high ceramic content and the resulting materials could be considered PEEK-bonded PTCa particulate composite. The composites were characterized using piezoelectric spectroscopy and ultrasonic immersion techniques. Values up to 38.5 pC/N were obtained for the longitudinal d33 piezoelectric coefficient. The composite was surface-mounted on a carbon fiber plate-like specimen and the ability of the PTCa/PEEK composite to detect acoustic emission (AE) is reported. © 2006 IEEE.

Descrição

Palavras-chave

Acoustic emission, Calcium-modified lead titanate (PTCa), Connectivity, Piezoelectric polymer composites, Piezoelectric transducers, Poly (ether-ether-ketone) (PEEK), Sensors, Sielectric strength, Acoustic emissions, Organic polymers, Piezoelectricity, Volume fraction, Dielectric strength

Como citar

IEEE Transactions on Dielectrics and Electrical Insulation, v. 13, n. 5, p. 1177-1181, 2006.