Publicação: Multivariate Development and Validation of a Stability-Indicating HPLC Method for the Determination of Glimepiride in Tablets
Nenhuma Miniatura disponível
Data
2013-09-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Aoac Int
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
This paper describes the multivariate development of a stability-indicating HPLC method for the quantification of glimepiride in pharmaceutical tablets. Full factorial design, Doehlert design, and response-surface methodology were used in conjunction with the desirability function approach. This procedure allowed the adequate separation of glimepiride from all degradant peaks in a short analysis time (about 9 min). This HPLC method uses potassium phosphate buffer (pH 6.5; 27.5 mmol/L)-methanol (34 + 66, v/v) mobile phase at a flow rate of 1.0 mL/min and UV detection at 228 nm. A Waters Symmetry (R) C18 column (250 x 4.6 mm, 5.0 mu m) at controlled room temperature (25 degrees C) was used as the stationary phase. The method was validated according to International Conference on Harmonization guidelines and demonstrated linearity from 2 to 40 mg/L glimepiride, selectivity, precision, accuracy, and robustness. The LOD and LOQ were 0.315 and 1.050 mg/L, respectively. The multivariate strategy adopted in this work can be successfully applied in routine laboratories because of its fast optimization without the additional cost of columns or equipment.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Journal Of Aoac International. Gaithersburg: Aoac Int, v. 96, n. 5, p. 960-967, 2013.
