Publicação: Development of friction-induced triboluminescent sensor for load monitoring
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
Real-time load monitoring of critical civil and mechanical structures especially dynamic structures such as wind turbine blades is imperative for longer service life. This article proposed a novel sensor system based on the proprietary in situ triboluminescent optical fiber (ITOF) sensor for dynamic load monitoring. The new ITOF sensor patch consists of an ITOF sensor network with micro-exciters integrated within a polymer matrix. The sensor patch was subjected to repeated flexural loading and produced triboluminescent emissions due to the friction between micro-exciters and ITOF sensors corresponding to each loading cycle. The friction-induced triboluminescent intensity directly depends on the loading rate, the coefficient of friction, and the applied load on patch. In general, the triboluminescent intensity increases exponentially with an increase in load. Additionally, the sensor patches comprising the coarser micro-exciters exhibited better results. Similarly, better results were achieved at higher loading rates although a threshold loading rate is required to excite the triboluminescent crystals for this sample configuration. The proposed new sensor has the ability to monitor dynamic continuous applied loads.
Descrição
Palavras-chave
flexural loading, friction, load monitoring, sensor, sensor patch, Triboluminescence
Idioma
Inglês
Como citar
Journal of Intelligent Material Systems and Structures, v. 29, n. 5, p. 883-895, 2018.
