Publicação: Diclofenac removal in water supply by adsorption on composite low-cost material
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
This work objective was to evaluate batch adsorption processes using polyethylene terephthalate composite (PTC) material, sugarcane bagasse ash (SBA) functionalized with iron oxide (Fe3+) (PTCSBA/ Fe3+) in the adsorption of 1000 µg L−1 of diclofenac sodium (DIC) in synthetic solution, simulating water supply. The batch test was started by determining the adsorbent mass (0.1, 0.2, 0.3, 0.4 and 0.5 g) to remove 1000 µg L−1 of DIC, followed by the adsorption kinetics and adsorption isotherm assays, evaluating the reaction rate and adsorption capacity, respectively. The PTCSBA/ Fe3+ mass that had the best efficiency in the DIC removal was 0.3 g, the pseudo second-order kinetic model (PSO) was the one that best fit the study having a determination coefficient (R2) equals to 0.97. The PTCSBA/ Fe3+ has good characteristics for DIC adsorption, achieving a 93% removal rate of sodium diclofenac. The composite is a low-cost adsorbent, 0.08 cents per kilogram of material, becoming a material with satisfactory characteristics for the removal of DIC. Therefore, it is recommended to use PTCSBA/ Fe3+ as adsorbent material in small water filter systems in order to remove DIC due to the low cost of the composite.
Descrição
Palavras-chave
Anti-inflammatory, chromatography, drugs, isotherm, kinetics
Idioma
Inglês
Como citar
Environmental Technology (United Kingdom).
