Publicação: Cu2+, Cr3+, and Ni2+ in mono- and multi-component aqueous solution adsorbed in passion fruit peels in natura and physicochemically modified: a comparative approach
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Resumo
Among the low-cost adsorbent are agricultural residues, which can be used in natura or modified forms. This work evaluated the adsorption of Ni2+, Cu2+, and Cr3+ in mono- and multi-component aqueous solutions using passion fruit peels in natura (Nat-PF) and physicochemically modified (Mod-PF). The adsorption was investigated by kinetic and isotherm models. A comparative investigation was conducted to analyze the effect of the experimental conditions by statistical test, adsorption capacity ratio, selectivity of adsorbate, and distribution coefficient. In both adsorbents, the process occurs in monolayer by chemosorption. Equilibrium was reached after 30 min, with highest adsorption capacity for Cu2+ as 0.495 mg g−1, for Cr3+ as 0.483 mg g−1, and for Ni2+ as 0.464 mg g−1. The adsorption in Mod-PF was less affected in multi-component solutions, reducing the adsorption capacity by 0.06–0.15 times when compared to monocomponent solutions, while in Nat-PF a reduction of more than half of adsorption capacity was obtained. The modifications imposed on the biomass led to a change in its adsorptive selective, being Cr3+ > Cu2+ > Ni2+ for Nat-PF and Cu2+ > Ni2+ > Cr3+ for Mod-PF. Graphical abstract: [Figure not available: see fulltext.]
Descrição
Palavras-chave
Activated carbon, Bioadsorbent, Metallic ions, Metals, Natural adsorbents, Residue, Wastewater
Idioma
Inglês
Como citar
Environmental Science and Pollution Research.
