Publicação: Application of minimum quantity lubrication with addition of water in the grinding of alumina
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Springer
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
Among the alternatives to reduce the application of cutting fluid in machining industry, minimum quantity lubrication (MQL) technique has been promising, although it can impair cooling properties and the ability of the fluid to penetrate the cutting region. In order to further reduce the quantity of oil and to improve the characteristics of the cooling lubrication method, this work aims to compare the effect of MQL with different ratios of oil/water (1:1, 1:3, and 1:5) on the performance of plunge cylindrical grinding of alumina. Lubricating effect and effective penetration of fluid in the cutting zone are considered the most relevant factors. The lowest surface roughness value was obtained with the application of conventional flood cooling, followed by MQL 1:1. In comparison to conventional MQL technique, reduced surface roughness and grinding wheel wear could be obtained by applying MQL with water.
Descrição
Palavras-chave
Plunge grinding, Alumina, Minimum quantity lubrication
Idioma
Inglês
Como citar
International Journal Of Advanced Manufacturing Technology. London: Springer London Ltd, v. 97, n. 5-8, p. 1951-1959, 2018.
