Publicação: Urban photovoltaic potential estimation based on architectural conditions, production-demand matching, storage and the incorporation of new eco-efficient loads
Carregando...
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
The photovoltaic solar potential in an urban sector and the effects produced by the electricity input into a low-voltage grid are determined, the analysis is performed for one year. First, the generation profiles are estimated, assuming the incorporation limits of typical silica panels and using photovoltaic (PV) tiles on roofs as an architectural alternative. Then, the consumer class demand is estimated. Production-demand matching is performed at the load point level to avoid impacts on the grid. A scenario incorporating a new load, induction heating cookers (IHCs) for all residential users, is posed, the use of which coincides with high-radiation hours. Finally, electrical storage is assumed to maximise the PV supply. A 16% coverage with silica PV panels, or 33% with PV tiles, would supply 46% or 39% of the consumption, respectively. With massive incorporation of IHCs and storage, the supply is increased to 73% and 59% of the consumption with silica panels and PV tiles, respectively. An annual consumption reduction of 16 Tn of liquefied petroleum gas is attained in the cases studied. Additionally, it is necessary to redirect the current subsidies for hydro dams and the overall energy sector towards promoting distributed microgeneration.
Descrição
Palavras-chave
Demand side management, Photovoltaics, Solar energy, Spatial distribution, Urban energy system
Idioma
Inglês
Como citar
Renewable Energy, v. 142, p. 224-238.
