Show simple item record

dc.contributor.authorLourenco, Angelo C.
dc.contributor.authorSeixas, Falcondes J. M. [UNESP]
dc.contributor.authorPelicer, Joao C. [UNESP]
dc.contributor.authorOliveira, Priscila S.
dc.date.accessioned2018-12-11T16:42:16Z
dc.date.available2018-12-11T16:42:16Z
dc.date.issued2015-01-01
dc.identifierhttp://dx.doi.org/10.1109/COBEP.2015.7420041
dc.identifier.citation2015 IEEE 13th Brazilian Power Electronics Conference and 1st Southern Power Electronics Conference, COBEP/SPEC 2016.
dc.identifier.urihttp://hdl.handle.net/11449/168632
dc.description.abstractMultipulse rectifier topologies based on phase-shifting auto-connected transformers are increasingly applied in power electronics devices for power quality improvement. Due their construction, they mitigate many low-harmonic frequency and reduce the Total Harmonic Distortion of the line current (THDi), resulting a high Power Factor (PF). The 18-pulse topology is formed by a phase-shifting transformer or autotransformer and three six-pulse bridge rectifiers and, frequently, passives elements named Interphase Transformers (IPT's) are used to perform the DC outputs parallel connected. The delta-autotransformer topology, used in this work process approximately 20% of the total load. To reduce the bulky elements (IPT's) and to reach regulated DC-output, this work proposes using three SEPIC-based high-frequency isolated converters to link the DC-side of the bridges to the load. In addition, the secondary windings of these DC-DC converters can be connected in series or parallel to perform higher or lower voltage through the load. The laboratory prototype rating 2.4kW was built and the main simulation results are shown to confirm the high power factor, regulated DC-bus, and high-frequency isolation with reduced size and weight.en
dc.language.isoeng
dc.relation.ispartof2015 IEEE 13th Brazilian Power Electronics Conference and 1st Southern Power Electronics Conference, COBEP/SPEC 2016
dc.sourceScopus
dc.subjectHarmonic distortion
dc.subjectMultipulse rectifier
dc.subjectPower Factor
dc.subjectSEPIC
dc.subjectTHDi
dc.title18-pulse autotransformer rectifier unit using SEPIC converters for regulated DC-bus and high frequency isolationen
dc.typeTrabalho apresentado em evento
dc.contributor.institutionFederal Institute of Mato Grosso Do sul
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionFederal University of Tocantins
dc.description.affiliationIFMS Federal Institute of Mato Grosso Do sul
dc.description.affiliationUNESP Univ. Estadual Paulista
dc.description.affiliationUFT Federal University of Tocantins
dc.description.affiliationUnespUNESP Univ. Estadual Paulista
dc.identifier.doi10.1109/COBEP.2015.7420041
dc.rights.accessRightsAcesso aberto
dc.identifier.scopus2-s2.0-84966339541
dc.identifier.lattes5526180195602581
dc.identifier.orcid0000-0002-9750-3223
unesp.author.lattes5526180195602581[2]
unesp.author.orcid0000-0002-9750-3223[2]
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record