Show simple item record

dc.contributor.authorGandara, Meriane
dc.contributor.authorMulinari, D. R.
dc.contributor.authorMonticeli, Francisco Maciel [UNESP]
dc.contributor.authorCapri, M. R.
dc.date.accessioned2020-12-12T01:13:30Z
dc.date.available2020-12-12T01:13:30Z
dc.date.issued2020-01-01
dc.identifierhttp://dx.doi.org/10.1080/15440478.2019.1710653
dc.identifier.citationJournal of Natural Fibers.
dc.identifier.issn1544-046X
dc.identifier.issn1544-0478
dc.identifier.urihttp://hdl.handle.net/11449/198459
dc.description.abstractTo enhance the removal of vegetal oil from water, the influence of the concentration of fibers from sugarcane bagasse pretreated by the steam explosion as reinforcement in polyurethane foam was used. The composites were obtained by mass mixing the polyol with the prepolymer (1: 1) and reinforced with 5% to 20% (wt/wt) sugarcane bagasse fibers. The fibers, composites and pure polyurethane were characterized by scanning electron microscopy (SEM), X-Ray Diffraction (XRD) and Surface area measurements (BET). Sorption tests were carried out on the fibers, pure polyurethane (PU) and composites. The sorption capacity of the composites was evaluated as a function of the fiber content inserted in the matrix. When applied as the oil sorbents, it was found that the composites reinforced with pretreated fibers presented better results, due to defibrillation of the fiber and the increase of its contact area dispersed in the polymer. Efficient removal increases with increasing concentration of fibers reinforced in polyurethane.en
dc.language.isoeng
dc.relation.ispartofJournal of Natural Fibers
dc.sourceScopus
dc.subjectcomposites
dc.subjectoil retention
dc.subjectoil sorption
dc.subjectpolyurethane
dc.subjectSugarcane bagasse
dc.subjectsurface treatment
dc.titleSugarcane Bagasse Fibers Reinforced in Polyurethane for Sorption of Vegetal Oilen
dc.typeArtigo
dc.contributor.institutionInstituto Tecnológico de Aeronáutica
dc.contributor.institutionUniversidade do Estado do Rio de Janeiro (UERJ)
dc.contributor.institutionUniversidade Estadual Paulista (Unesp)
dc.contributor.institutionUniversidade de São Paulo (USP)
dc.description.affiliationDepartment of Science and Aerospace Technology Instituto Tecnológico de Aeronáutica
dc.description.affiliationDepartment of Mechanical and Energy Universidade do Estado do Rio de Janeiro
dc.description.affiliationDepartment of Materials and Technology São Paulo State University (Unesp)
dc.description.affiliationDepartment of Chemistry Engineering Universidade de São Paulo
dc.description.affiliationUnespDepartment of Materials and Technology São Paulo State University (Unesp)
dc.identifier.doi10.1080/15440478.2019.1710653
dc.identifier.scopus2-s2.0-85078586032
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record