Show simple item record

dc.contributor.authorNunes De França, F. A. [UNESP]
dc.contributor.authorPereira, V. R.G.
dc.date.accessioned2022-04-28T19:03:03Z
dc.date.available2022-04-28T19:03:03Z
dc.date.issued2013-01-01
dc.identifier.citationDesign and Practice of Geosynthetic-Reinforced Soil Structures, p. 650-658.
dc.identifier.urihttp://hdl.handle.net/11449/220586
dc.description.abstractThis paper presents a study case in which a geosynthetic-reinforced soil (GRS) structure was used to rebuild a 12 m high slope after its failure. The failed slope is located between the parking lot of a private company and a public school. Due to surrounding structures restrictions, this project required a solution with rapidity in execution. In addition, as a requirement established by its owner, this structure should recover the original geometry of the slope. Besides the importance regarding surrounding constructions, an interesting aspect of this study case relies on the versatility of geosynthetic materials. A woven geotextile was used as reinforcement. Five other geosynthetic materials were used in this study case. Facing comprised a geocell filled with local soil cover and grass mats, resulting in a green facing. A geonet was used to hold the grass mats in place before grass roots development. Regarding the drainage system, geocomposite drains and geopipes were installed to drain subsurface water. A nonwoven geotextile was used as filter in drainage trenches, which were placed near the structure toe. Additionally to the GRS structure, the lower portion of the slope was reinforced with soil nailing technique. The face of the nailed soil portion was covered with sandbags and shotcrete. It emphasizes the flexibility of GRS structures regarding their application with other technical options in Geotechnical Engineering. The economic aspect of this study case also deserves attention. It did not require soil transportation and other design and construction steps, e.g. concrete structures design and construction.en
dc.format.extent650-658
dc.language.isoeng
dc.relation.ispartofDesign and Practice of Geosynthetic-Reinforced Soil Structures
dc.sourceScopus
dc.titleGeosynthetic-reinforced soil structure built to restore original geometry of a 12m high slope after failure using local soilen
dc.typeTrabalho apresentado em evento
dc.contributor.institutionUniversidade Estadual Paulista (UNESP)
dc.contributor.institutionGeosoluções Geotechnical and Environmental Engineering Ltd.
dc.description.affiliationSão Paulo State University, Alameda Bahia, 550, Centro
dc.description.affiliationGeosoluções Geotechnical and Environmental Engineering Ltd.
dc.description.affiliationUnespSão Paulo State University, Alameda Bahia, 550, Centro
dc.identifier.scopus2-s2.0-84960968731
Localize o texto completo

Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record