Cinética da remoção dos extrativos da madeira de Eucalyptus grandis durante polpação Kraft

Carregando...
Imagem de Miniatura

Data

2010-07-01

Autores

Sarto, Camila [UNESP]
Sansigolo, Claudio Angeli [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Estadual de Maringá (UEM), Pro-reitoria Pesquisa Pos-graduacao

Resumo

Kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The objective of this work was to study the kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The pulping was done in steel tubular reactors using wood saw under the following conditions: active alkali = 14%, sulfidity = 25%; liquor-to-wood ratio = 10 L kg(-1) of dry wood; and temperatures of 130, 150, 160 and 180 C during 30, 60, 90, 120, 150 and 180 minutes. After pulping, analyses were conducted of the yield and extractives in residue (pulp and reject). Total extractives (ethyl alcohol-toluene (1:2), ethyl alcohol and hot water, respectively) and soluble extractives in acetone were analyzed. The results showed that most extractives are degraded in the first 30 minutes of the pulping process. It was observed that the removal occurs in two different stages: the first is rapid, where the majority of the extractives are removed, and the last is slow, where few extractives are removed.

Descrição

Palavras-chave

Eucalyptus grandis, extractives, Kraft pulping process

Como citar

Acta Scientiarum-technology. Maringa: Universidade Estadual de Maringá (UEM), Pro-reitoria Pesquisa Pos-graduacao, v. 32, n. 3, p. 227-235, 2010.