Publicação: Efeito da temperatura e tempo de austenitização nas transformações de fase da liga 13Cr2Ni0,1C
Carregando...
Arquivos
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso aberto
Resumo
New classes of martensitic stainless steels, with low carbon levels, have been developed aiming to meet the needs of the petroleum industry segment. However, their use has been restricted due to the fact it is a recent development and many of its properties are still under investigation. This work determines the values of initial and final temperatures for the austenitic transformation and the initial and final temperatures of martensitic formation for alloy 13Cr2Ni0,1C, by means of dilatometric tests under continuous cooling. Based on these results the optimized conditions for quench and temper heat treatments were obtained. The microstructural characterization of the alloys under coarse fusion condition was carried out by optical microscopy and the presence of delta-ferrite in the martensitic matrix was observed.
Descrição
Palavras-chave
Dilatometry, Quench, Stainless steel, Temper, dilation, ferrite, heating, microstructure, oil industry, optimization, petroleum, phase transition, steel, steel structure, temperature effect
Idioma
Português
Como citar
Revista Escola de Minas, v. 63, n. 1, p. 27-31, 2010.
