Um modelo de linha de transmissão bifásica desenvolvido diretamente no domínio das fases

Carregando...
Imagem de Miniatura

Data

2011-08-26

Autores

Souza Junior, Newton Vieira de [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Estadual Paulista (Unesp)

Resumo

Sabe-se que uma linha de transmissão polifásica pode ser representada no domínio modal, por seus n modos de propagação que se comportam como sendo n linhas monofásicas independentes. Uma vez calculadas as correntes e tensões no domínio modal, as mesmas são convertidas para o domínio das fases por meio de uma matriz de transformação modal. A matriz de transformação modal é uma matriz cujos elementos são escritos em função dos parâmetros longitudinais e transversais da linha, variam em função da frequência e, geralmente, são obtidos por meio de métodos numéricos. Deste modo, diz-se que o modelo obtido é um modelo numérico de linha. Neste trabalho foi feita uma abordagem a respeito de um modelo analítico de linha de transmissão bifásica. O modelo proposto utiliza também a representação modal, mas a matriz de transformação será obtida analiticamente em função dos parâmetros da linha. Deste modo, foi possível obter, analiticamente, relações entre as correntes e tensões de fase da linha baseando-se unicamente nos parâmetros longitudinais e transversais da mesma
It is know that polyphase transmission line can be represented in the modal domain its n propagation modes that behave as n independent single-phase lines. Once calculated the currents and voltages in the modal domain, they are converted into the realm of the phases by means of a modal transformation matrix. The modal transformation matrix is a matrix whose elements re written against the parameters of longitudinal and cross the and they are usually obtained by numerical methods. In this paper an approach was made on an analytical model of two-phase transmission line. The proposed model uses the modal representation, but the transmission matrix obtained analytical in terms of line parameters. The development of the analytical model will be based on the modal model. Thus, initially will be obtained analytically, a modal matrix decomposition that allows to calculate analytically the eigenvalues of the product [Z][Y] line. Once obtained the eigenvalues it possible to abtain the modes of propagation and characteristic impedance of the line modes. Then, using the solutions algebraic differential equation of a single-phase line, we abtain the equations of currents and voltages of each of modes of spread of the row. In a final step, the equations of modal currents and voltages are converted into the realm of the phases, resulting in algebraic equations that can calculate the currents and phase voltages of the line in the frequency domain

Descrição

Palavras-chave

Newton-Raphson, Metodo, Domínio modal, Linhas de transmissão, Linhas polifásicas, Matriz de transformação, Modal domain, Transmission line, Two-phase line, Transformation matrix, Newton-Raphson

Como citar

SOUZA JUNIOR, Newton Vieira de. Um modelo de linha de transmissão bifásica desenvolvido diretamente no domínio das fases. 2011. 88 f. Dissertação (mestrado) – Universidade Estadual Paulista, Faculdade de Engenharia de Ilha Solteira, 2011.