Estudo da arquitetura molecular de filmes layer-by-layer de ftalocianina tetrasulfonada de cobre
Carregando...
Arquivos
Data
2008-11-19
Autores
Storti, Felipe Chagas [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Estadual Paulista (Unesp)
Resumo
Nesta dissertação é apresentado um estudo envolvendo a arquitetura molecular (crescimento controlado, morfologia e organização molecular) de filmes Layer-by-Layer (LbL) contendo ftalocianina tetrasulfonada de cobre (CuTsPc). Inicialmente foram realizados estudos sobre a cinética de crescimento desses filmes para determinação do tempo de adsorção do material no substrato. Uma vez determinado este tempo, filme LbL foram fabricados utilizando soluções catiônica de poli(alilamina) hidroclorada - PAH) e aniônica de CuTsPc. Os filmes de PAH/CuTsPc foram produzidos de forma manual e utilizando um braço mecânico em valores de pHs 2,5; 5,5 e 8,5 sendo então caracterizados por espectroscopia eletrônica via absorção na região do ultravioleta-visível (UV-Vis), espectroscopia vibracional via espalhamento Raman e absorção na região do infravermelho com transformadora de Fourier (FTIR) e microscopias óptica e força atômica (AF,A). A espectroscopia de absorção na região do UV-Vis foi utilizada para acompanhar o crescimento do filme LbL assim como investigar a presença de agregados. A técnica de FTIR permitiu investigar as interações entre o PAH e a CuTsPc e determinar a organização molecular comparando filme LbL e cast. O acoplamento entre microscópio óptico e espectrógrafo Raman (técnica microRaman) possibilitou analisar a morfologia do filme LbL em escala micrométrica combinando informações ópticas e químicas. A morfologia do filme LbL em escala nanométrica foi investigada utilizando-se AFM. Foi observado que os filmes crescidos mecanicamente são mais espessos em relação aos crescidos manualmente, além de apresentarem maior rugosidade. Ainda em termos morfológicos, os filmes crescidos mecanicamente apresentam uma maior quantidade de agregados, porém, menores em termos de diâmetro médio, tanto em escala nano como micrométrica...
This dissertation presents a study involving the molecular architecture (controlled growth, morphology, and molecular organization) of layer-by-layer (LbL) films containing copper phthalocyanine tetrasulfonated (CuTsPc). Initially, the studies were performed on the kinetics of growth of these films to determine the time of adsorption of the material on the substrate. Once determined this time, LbL films were produced by using solutions of cationic poly (hydrochloric alilamina - PAH) and anionic CuTsPc. The films of PAH / CuTsPc were produced either manually or using a mechanical arm in pH values of 2.5, 5.5, and 8.5, and then characterized by electron spectroscopy via absorption in the ultraviolet-visible (UV-Vis), vibrational spectroscopy by Raman scattering and absorption in the infrared region with Fourier transform infrared (FTIR) and optical microscopy and atomic force microscopy (AFM). The absorption spectroscopy in the UV-Vis was used to follow the growth of the LbL film and to investigate the presence of aggregates. The FTIR technique allowed investigatin the interactions between the PAH and CuTsPc and determining the molecular organization comparing LbL films and cast. The coupling between optical microscope and Raman spectrograph (micro-Raman technique) allowed analyzing the morphology of the LbL film at micrometric scale combining optical and chemical information. The morphology of the LbL film at nanometer scale was investigated by using AFM. It was observed that the films grown mechanically are thicker in relation to grown manually and present greater roughness. Also in morphological terms, the films grown mechanically have an increased number of aggregates, however, smaller in terms of average diameter, at nano and micrometric scales. It was found that the pH is a key parameter to induce the formation of molecular clusters. For instance, more homogeneous LbL films in term... (Complete abstract click electronic access below)
This dissertation presents a study involving the molecular architecture (controlled growth, morphology, and molecular organization) of layer-by-layer (LbL) films containing copper phthalocyanine tetrasulfonated (CuTsPc). Initially, the studies were performed on the kinetics of growth of these films to determine the time of adsorption of the material on the substrate. Once determined this time, LbL films were produced by using solutions of cationic poly (hydrochloric alilamina - PAH) and anionic CuTsPc. The films of PAH / CuTsPc were produced either manually or using a mechanical arm in pH values of 2.5, 5.5, and 8.5, and then characterized by electron spectroscopy via absorption in the ultraviolet-visible (UV-Vis), vibrational spectroscopy by Raman scattering and absorption in the infrared region with Fourier transform infrared (FTIR) and optical microscopy and atomic force microscopy (AFM). The absorption spectroscopy in the UV-Vis was used to follow the growth of the LbL film and to investigate the presence of aggregates. The FTIR technique allowed investigatin the interactions between the PAH and CuTsPc and determining the molecular organization comparing LbL films and cast. The coupling between optical microscope and Raman spectrograph (micro-Raman technique) allowed analyzing the morphology of the LbL film at micrometric scale combining optical and chemical information. The morphology of the LbL film at nanometer scale was investigated by using AFM. It was observed that the films grown mechanically are thicker in relation to grown manually and present greater roughness. Also in morphological terms, the films grown mechanically have an increased number of aggregates, however, smaller in terms of average diameter, at nano and micrometric scales. It was found that the pH is a key parameter to induce the formation of molecular clusters. For instance, more homogeneous LbL films in term... (Complete abstract click electronic access below)
Descrição
Palavras-chave
Ciencia, Filmes Layer-by-Layer, Molecular architecture, LbL films, CuTsPc, UV-Vis, Micro-Raman
Como citar
STORTI, Felipe Chagas. Estudo da arquitetura molecular de filmes layer-by-layer de ftalocianina tetrasulfonada de cobre. 2008. 70 p. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Ciências de Bauru, 2008.