Development of a micro heat exchanger made with ceramic multi-layers (LTCC) and its setup to gas flow measurements
| dc.contributor.author | Vásquez-Alvarez, Elsa | |
| dc.contributor.author | Degasperi, Francisco T. [UNESP] | |
| dc.contributor.author | Gongora-Rubio, Mario R. | |
| dc.contributor.author | Giudici, Reinaldo | |
| dc.contributor.institution | Universidade de São Paulo (USP) | |
| dc.contributor.institution | Universidade Estadual Paulista (Unesp) | |
| dc.contributor.institution | CTPP | |
| dc.date.accessioned | 2014-05-27T11:24:03Z | |
| dc.date.available | 2014-05-27T11:24:03Z | |
| dc.date.issued | 2009-12-01 | |
| dc.description.abstract | A green ceramic tape micro heat exchanger was developed using LTCC technology. The device was designed by using a CAD software and 2D and 3D simulations using a CFD package (COMSOL Multiphysics) to evaluate the fluid behavior in the microchannels. The micro heat exchanger is composed of five thermal exchange plates in cross flow arrangement and two connecting plates; heat exchanger dimensions are 26 × 26 × 6 mm3. Preliminary tests were carried out to characterize the device both in atmospheric pressure and in vacuum. The same techniques used in vacuum technology were applied to check the rotameters and to prevent device leakages. Thermal performance of the micro heat exchanger was experimentally tested. © 2009 Elsevier B.V. All rights reserved. | en |
| dc.description.affiliation | Department of Chemical Engineering Polytechnic School University of São Paulo, Av. Prof. Luciano Gualberto, n. 380, trav. 3, CEP: 05508-900 - São Paulo - SP | |
| dc.description.affiliation | Faculdade de Tecnologia de São Paulo FATEC-SP UNESP, São Paulo, SP | |
| dc.description.affiliation | Instituto de Pesquisas Tecnológicas CTPP, CEP: 05508-901 São Paulo - SP | |
| dc.description.affiliation | Laboratório de Sistemas Integráveis Escola Politécnica Universidade de São Paulo, CEP: 05508-900 - São Paulo -SP | |
| dc.description.affiliationUnesp | Faculdade de Tecnologia de São Paulo FATEC-SP UNESP, São Paulo, SP | |
| dc.format.extent | 1773-1778 | |
| dc.identifier | http://dx.doi.org/10.1016/S1570-7946(09)70686-8 | |
| dc.identifier.citation | Computer Aided Chemical Engineering, v. 27, n. C, p. 1773-1778, 2009. | |
| dc.identifier.doi | 10.1016/S1570-7946(09)70686-8 | |
| dc.identifier.issn | 1570-7946 | |
| dc.identifier.scopus | 2-s2.0-77649335436 | |
| dc.identifier.uri | http://hdl.handle.net/11449/71277 | |
| dc.language.iso | eng | |
| dc.relation.ispartof | Computer Aided Chemical Engineering | |
| dc.relation.ispartofsjr | 0,190 | |
| dc.rights.accessRights | Acesso aberto | |
| dc.source | Scopus | |
| dc.subject | Cross flow | |
| dc.subject | LTCC | |
| dc.subject | Micro structured heat exchanger | |
| dc.subject | Simulation | |
| dc.title | Development of a micro heat exchanger made with ceramic multi-layers (LTCC) and its setup to gas flow measurements | en |
| dc.type | Trabalho apresentado em evento | |
| dcterms.license | http://www.elsevier.com/about/open-access/open-access-policies/article-posting-policy |