Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan
Nenhuma Miniatura disponível
Data
2012-01-01
Autores
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Crc Press-taylor & Francis Group
Tipo
Trabalho apresentado em evento
Direito de acesso
Acesso aberto
Resumo
This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Innovative Developments on Virtual and Physical Prototyping. Boca Raton: Crc Press-taylor & Francis Group, p. 797-800, 2012.