Effects of manufacturing and finishing techniques of feldspathic ceramics on surface topography, biofilm formation, and cell viability for human gingival fibroblasts
Nenhuma Miniatura disponível
Data
2018-11-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
Purpose: Feldspathic ceramic restorations can be obtained by different techniques (stratification or computer-aided design/computer-aided manufacturing [CAD/CAM] blocks) and finishing procedures (polishing or glaze application). This study evaluated the effects of techniques and finishing procedures on surface properties, biofilm formation, and viability of human gingival fibroblasts (FMM-1) in contact with these materials. Methods and Materials: Ceramic specimens were obtained through a stratification technique (Vita VM9) and from CAD/CAM blocks (Vita Blocs Mark II; both Vita Zahnfabrik) and their surfaces were finished by polishing (ce-ramisté diamond rubbers + polishing paste; ''p'' subgroups) or glaze spray application + sintering (''g'' subgroups). Roughness (Ra and RSm parameters) and surface free energy (SFE) were measured. Early biofilm formation of Streptococcus mutans, Streptococcus sanguinis, and Candida albicans was evaluated by counting colony-forming units (CFU). MTT (3-[4.5-dimethyl-thiazol-2-yl-]-2.5-diphenyl tetrazolium bromide) cytotoxicity test evaluated cellular viability for the growth of FMM-1 after 24 hours and seven days of contact. Scanning electron microscopy (SEM) and three-dimensional optical profilometry were performed to qualitatively analyze the surface. Data were analyzed by analysis of variance, Tukey test, and t-test (all a=0.05). Results: Polished samples presented lower roughness (Ra, p=0.015; RSm, p=0.049) and higher SFE (p=0.00). Streptococci had higher CFU in all groups, but the CFU of C albicans was lower for polished samples. Biofilm formation was influenced by the interaction of all factors (p=0.018), and the materials showed no cytotoxicity to FMM-1 growth. Conclusions: Polishing resulted in the lowest values for surface roughness and higher SFE values.PolishedceramicsshowedlessCalbicans adherence while the adherence of Streptococci was greater than C albicans in all conditions.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Operative Dentistry, v. 43, n. 6, p. 593-601, 2018.