Impacts of the alloying elements and thermo-mechanical processing on the phase stability, crystalline structure, microstructure, and selected mechanical properties of Ti-(10-x)Al-xV (x = 0, 2, and 4 wt%) alloys targeted as external prostheses
Carregando...
Arquivos
Fontes externas
Fontes externas
Data
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Elsevier
Tipo
Artigo
Direito de acesso
Acesso restrito
Arquivos
Fontes externas
Fontes externas
Resumo
This study aimed to characterize Ti-Al-V alloys submitted to thermo-mechanical processes and evaluate their impact on the crystalline structure, microstructure, coefficient of thermal expansion (CTE), selected mechanical properties, and cytotoxicity. X-ray diffraction (XRD) analysis revealed a major α phase, with V acting as a β-stabilizer. The cooling rate and the plastic deformation contributed to the formation of minor martensitic α′ and β phases, with notable variations in cell parameters. The Energy-Dispersive XRD indicated the CTE was dependent on the alloying elements. Ti-10Al and Ti-8Al-2V depicted Widmanstätten laths and basket-weave structures, while Ti-6Al-4V showed typical features of β grain boundaries. Thermodynamic predictions aligned with the observed phase compositions. Vickers micro-hardness tests yielded values surpassing those of commercially pure titanium (CP-Ti), attributed to the synergistic effects of solid solution, phase precipitation, and strain hardening effects. And, elastic modulus approximated that of CP-Ti, largely due to the α phase's predominance. The solution treatment reduced the elastic modulus compared to the hot-rolled samples due to the stress relief and α′ and β phase precipitation. Preliminary cytotoxicity assays confirmed the non-toxicity of the samples to cell viability. These findings suggest that the solutionized Ti-10Al sample is an economically viable candidate for fabricating external prostheses.
