Publicação: Stress analysis of axial and tilted implants in full-arch fixed dentures under different abutment conditions
Nenhuma Miniatura disponível
Data
2016-01-01
Orientador
Coorientador
Pós-graduação
Curso de graduação
Título da Revista
ISSN da Revista
Título de Volume
Editor
Tipo
Artigo
Direito de acesso
Acesso restrito
Resumo
The aim of this study was to evaluate the stress distribution on fullarch prostheses, considering axial implants and tilted implants with or without abutments. Two photoelastic models were made, being that in 1 model the implants were inserted perpendicular, whereas in the other model 2 implants were inserted perpendicular and 2 implants were inserted with tilting 308 to the distal area. The prosthetic situations were evaluated: A-axial implants and nonsegmented full-arch prosthesis; B-axial implants and segmented full-arch prosthesis; C-tilted distal implants and nonsegmented full-arch prosthesis; D-tilted distal implants and segmented fullarch prosthesis, and was applied an axial load of 100N at 5 points. The results showed greater stress concentration for axial implants than tilted implants in anterior and posterior loading. There was no difference in stress distribution to the use of abutment in the tilted implants. Shorter cantilever with tilted implants improved the stress distribution; the use of abutment did not influence the stress distribution.
Descrição
Palavras-chave
Idioma
Inglês
Como citar
Journal of Craniofacial Surgery, v. 27, n. 3, p. e249-e252, 2016.
