Influence of illuminants and different observers on the perception of surface gloss of resin composite
Nenhuma Miniatura disponível
Data
2018-01-01
Autores
Tessarin, Fernanda Bastos Pereira [UNESP]
Meirelles, Laura Célia Fernandes [UNESP]
Rocha, Rafael Santos [UNESP]
Caneppele, Taciana Marco Ferraz [UNESP]
Bresciani, Eduardo [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Objective: To evaluate the visual perception of surface gloss of resin composite under different illuminants by different observers. Material and methods: twelve cylindrical specimens (6mm x 1mm) were fabricated using a nanofilled resin composite (Z350, A2E shade) in order to compare different observers and to determine the limit of perceptibility of surface gloss. Bovine tooth specimen with similar dimensions was obtained for the comparison of different illuminants. Polishing of resin specimens was performed resulting in 6 groups, presenting surface gloss values at 10, 25, 40, 55, 70, and 85 GU (gloss units), measured by glossmeter (NOVOCURVE). Fifteen individuals were selected: 5 lay-person, 5 undergraduate students, and 5 dental professionals. Participants observed the specimens in a light booth (Gti lightbox) under three different illuminants, and rated the possible combinations between resin specimens or with the bovine enamel specimen (85GU). Data obtained were analyzed by PROBIT non-linear regression analysis (α=0.05). Results: Differences were observed among types of illuminants (p=0.042) and ΔGU (p=0.004), with no interaction between factors (p=0.139). The fluorescent light presented lower surface gloss perceptibility values in relation to incandescent light. There was no influence by type of observers (p=0.598). The surface gloss perception limit was 17.6 GU under the presented tested conditions. Conclusion: the illuminant type influenced perception of gloss, with lower percentage of perceptibility for fluorescent light, while such perceptibility was not influence by different observers.
Descrição
Palavras-chave
Composite resins, Illuminants, Observer variation, Surface gloss
Como citar
Brazilian Dental Science, v. 21, n. 4, p. 451-460, 2018.